Instruction/ maintenance manual of the product 04170XX0 Axor
Go to page of 16
Installation Instructions / W arranty Solaris² E 04170XX0 Solaris² E 04171XX0 Metro² E 04196XX0 Metro² E 04197XX0 Allegro² E 04183XX0 Allegro² E 04184XX0.
2 T rim, 3- and 4-Hole Roman T ub Sets Solaris² E 04171XX0 Metro² E 04197XX0 Allegro² E 04184XX0.
3 Installation Considerations The 4-Hole Roman T ub Set trim kits require rough 06646000. The 3-Hole trim kits require rough 06607000. The roughs are not included. The rough must be installed and the mounting surface complete and made water tight before installation of this trim kit.
4 Installation - 3-Hole T rim Kits If you are using a 4-Hole set, please turn to page 6 Install the Handles Remove the plaster shields from the hot and cold valves and the spout tee. Install the Spout Remove the brass plug from the tee. Install the handle escutcheons.
5 Push the spout sealing ring firmly into the spout tee. Install the spout escutcheon. Press the spout over the spout tee. Install and tighten the screw with a 3 mm Allen wrench. CAUTION: do not overtighten the screw or the o- rings on the diverter will defor m, which will cause a leak.
6 Installation - 4-Hole T rim Kits Install the Handles Remove the plaster shields from the hot and cold valves and the spout tee. Install the Diverter and Spout Remove the brass plug from the tee. Install the escutcheons. Install the white plastic snap connectors and screws.
7 Install the pin on the diverter . Install the spout escutcheon. Firmly press the spout over the tee and diver ter . T ighten the screw with the included 3 mm Allen wrench. CAUTION: do not overtighten the screw or the o- rings on the diverter will defor m, which will cause a leak.
8 Install the Handshower (4-hole models only) Install the check valve in the elbow , with the arrow pointing in the direction of the water flow . Remove the plaster shield from the handshower holder . Pull out on the handshower hose. Install the handshower holder escutcheon.
9 Handshower User Instructions T o change spray modes, push the selector lever until the desired spray is achieved. Rain AIR Balance AIR Whirl AIR Scale Removal The Raindance E 100 Air 3-jet handshower incor- porates the Quick Clean™ cleaning system.
10 If scale deposits are noticed on the spray face, pour about 3/4” of a commercial scale remover , such as Lime-A way™ or CLR™ ,into a shallow dish. Dilute the remover according to the label instructions. Soak only the spray face in the solution for the amount of time specified on the label.
11 Replacement Parts 1 aerator 13956XX0 2 spout escutcheon 97779XX0 3 sealing ring 88512000 4 snap connector 94184000 5 diverter 96775000 6 diverter knob 98707XX0 7 handshower 28502XX1 8 check valve 9.
12 Cleaning Recommendation for Hansgrohe Pr oducts Modern lavator y faucets, kitchen faucets, and showers consist of ver y different materials to comply with the needs of the market with regard to design and functionality . T o avoid damage and returns, it is necessar y to consider certain criteria when cleaning.
13 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
14 THIS PRODUCT . HANSGROHE SHALL NOT BE LIABLE TO PURCHASER OR ANY PERSON FOR ANY INCIDENT AL, SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS W ARRANTY OR ANY IMPLIED W ARRANTY (INCLUDING MERCHANT ABILITY).
15.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
An important point after buying a device Axor 04170XX0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axor 04170XX0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axor 04170XX0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axor 04170XX0 you will learn all the available features of the product, as well as information on its operation. The information that you get Axor 04170XX0 will certainly help you make a decision on the purchase.
If you already are a holder of Axor 04170XX0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axor 04170XX0.
However, one of the most important roles played by the user manual is to help in solving problems with Axor 04170XX0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axor 04170XX0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
