Instruction/ maintenance manual of the product AP320XC Smeg
Go to page of 23
Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 27 2. INSTALLATION _________________________________________ 29 3. DESCRIPTION OF CONTRO LS ____________________________ 33 4. USE OF THE OVEN ______________________________________ 37 5.
Introduction 1. INSTRUCTIONS FOR SAFE AND PR OPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN A N ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE CAREFUL READING OF THIS MANUAL AN D ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN.
Introduction ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE “ZERO” (OFF) POSITION WHEN YOU FINISH USING THE OVEN. NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY CATCH LIGHT AND CAUSE FIRES. DURING USE THE APPLIANCE BECOMES VERY HOT.
Instructions for the installer 2. INST ALLA TION 2.1 Electrical connection Check that the mains vo ltage and power cable ratings are as per the information provided on the label attach ed to the oven door frame.
Instructions for the installer 30 For operation on 220-240V ∼ : use an H05RR-F / H05V2V2-F type three-core cable (3 x 4 mm 2 ). For operation on 380-415V2N ∼ : use an H05RR-F / H05V2V2-F type four-core cable (4 x 2.5 mm 2 ). For operation on 380-415V3 N ∼ : use an H0 5 RR F / H 05 V2V2- F type five-core cable (5 x 1.
Instructions for the installer 2.2 Installing the oven The oven is designed for installation into any piec e of furniture as long as it is heat-resistant. Proceed accord ing to the dimensi ons shown in Figures 1 , 2 and 3 . For installing under a work top, follow th e dimensions given in Figure 3 .
Instructions for the installer 32 Never use the oven door to lever the oven into place when fitting. Avoid exerting too much pres sure on the oven door when open. 2.3 Connecting the hob to the oven Once installed, the hob must be con nected to the oven.
Instructions for the user 3. DESCRIPTION OF CONTROLS 3.1 Front control panel All the oven controls are grou ped together o n the front panel. STATIC MODEL 5-FUNCTION MODEL 6- FUNCTION MODEL 7- FUNCTIO.
Instructions for the user 34 5-FUNCTION MODEL + HOB CONTROLS 6-FUNCTION MODEL + HOB CONTROLS FUNCTION CONTROL KNOB (static oven) Cooking temperature is selected by turning the knob clockwis e to the desired se tting, between 50 ° and 240 - 250°C (Dependi ng on models).
Instructions for the user FUNCTION CONTROL KNOB Rotate the knob in either direction to sel ect desired function from the following: NO FUNCTION SET HALF GRILL ELEMENT UPPER AND LOWER HEATING ELEMENT +.
Instructions for the user 36 To set cooking time turn the knob clockwise. The numbers from 5 to 90 correspond to minutes. Adjustment is progressive and intermedi ate positions between the numbers shown may be used. At the end of programmed cooking, a n audible alarm sounds which go es off automatically after 4-5 seconds.
Instructions for the user 4. USE OF THE O VEN 4.1 Warnings and general advice Before using the oven fo r the first time, pre-heat it to maximum temperature ( 250 °C) long enough to burn off any manufacturi ng oily residues which could give the food a bad taste.
Instructions for the user 38 5. A V AILABLE A CCESSORIES The oven features 4 support positions for shelves and pans of different height. Some models do not feature all accessories . Chrome shelf: useful for holdi ng cooking vessels. Grill mesh: for placing above grill pan to allow juices to drip into pan below.
Instructions for the user 6. COOKING HINTS In fan-assisted mode pr eheating shou ld be carried out at 30/40°C above the cooking temperature. Thi s considerably shortens cooking tim es and reduces power consumpti on, as well as giving better cooking results.
Instructions for the user 40 Multiple cooking is possible as long as the cooking temperature of the different foods is the same. 6.3 Grill cooking FUNCTION SWITCH THERMOSTAT SWITCH . Permits rapid browning of foods. You are advised to plac e the pan in the highest position.
Instructions for the user 6.5 Delicate cooking (in some models only) FUNCTION SWITCH THERMOSTAT SWITCH 50 ÷ 250°C Ideal for pastries and cakes with a liquid surface and littl e sugar and moist desserts in moulds.
Instructions for the user 42 6.7 Spit roasting (models with static oven) THERMOSTAT SWITCH Prepare the food on the spit rod and block fork screws A . Insert the frame B in the third level from the bottom. Remove handle D an d position the spit rod with the handle hold er E in the guide on frame B .
Instructions for the user 6.8 Recommended cooking table Cooking times, especially m eat, vary according to the thickness and quality of the food and to consumer taste.
Instructions for the user 44 FAN COOKING SHELF POSITION ( 1 IS LOWEST) TEMPERATURE (°C) TIME IN MINUTES FIRST COURSES LASAGNE OVEN-BAKED PASTA CREOLE RICE 2 2 2 190 - 210 190 - 210 190 - 220 20 - 25 .
Instructions for the user 7. CLEANING AND MAINTENANCE NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. Before carrying out any maintenan ce, switch off the power supply to the machine. 7.1 Cleaning stainless steel To keep stainless steel i n good condition it shoul d be cleaned regularly after use.
Instructions for the user 46 • Clean the oven gril l and side guides with hot water and non-abrasiv e detergent. Rinse and dry. • The oven should be oper ated at t he maximum temperature for about 15/20 minutes after using specific pr oducts, to eliminate the residues deposited inside the oven.
Instructions for the user 8. ADDITIONAL MAINTENANCE The oven may require additi onal maintenance or replacem ent of parts subject to wear such as seals, bulbs, and so on. The following instructions describe how to carry out these minor maintenance operations.
Instructions for the user 48 8.2 Removing the door Raise leve rs on each hinge A to loc k the h inges befor e attemp ting to remove the door. Hold the door on bo th sides with both hands near hinges B . Lift up the door forming an angle of about 45° and remove.
An important point after buying a device Smeg AP320XC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg AP320XC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg AP320XC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg AP320XC you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg AP320XC will certainly help you make a decision on the purchase.
If you already are a holder of Smeg AP320XC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg AP320XC.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg AP320XC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg AP320XC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
