Instruction/ maintenance manual of the product ALFA201XE Smeg
Go to page of 17
Index 1. PRECAUTIONS FOR SAFETY AND USE _____________________ 21 2. INSTALLING THE OVEN __________________________________ 23 3. DESCRIPTION OF C ONTROLS ____________________________ 25 4. USING THE OVEN _______________________________________ 26 5. CLEANING AND MAIN TENANCE ___________________________ 33 6.
Presentation 1. PRECA UTIONS FOR SAFETY A ND USE THIS MANUAL IS AN I NTEGRAL PART OF T HE APPLIANCE. TAKE GOOD CARE OF IT A ND KEEP IT TO HAND THROUGHOUT THE OVEN'S LIFE CYCLE. WE URG E YOU TO READ THI S MANUAL AND ALL THE INFORMATIO N IT CONTAINS CAREFULLY BEFO RE USING THE OVEN.
Presentation NEVER PLAC E INFLAMMABLE OBJECTS I N THE OVEN: IF IT SHOU LD ACCIDENTALLY BE SWITCHED ON, T HIS MIGHT CAUSE A FIRE. THE APPLIAN CE BECOMES VERY HOT DURI NG USE. OVEN GLOVES SHOULD ALWAY S BE WORN. THE NAMEPLA TE WITH THE TECHNICAL DATA, SERIAL NUM BER AND MARK IS IN A VISIBL E POSITION ON THE BACK OF TH E OVEN.
Instructions for the Installer 2. INST ALLING THE O VEN The oven is designed for free-standi ng installation on a horizontal work- top. It must be far enough from the wa ll behind it to allow easy access to the terminal board for conne ction of the power supply lead.
Instructions for the Installer 24 2.2 Safety thermosta t The oven is fitted with a safety devic e tripped in case of a serious malfunction. To reset the safety dev ice, call the after-sales service.
Instructions for the User 3. DESCRIPTION OF CONTROLS STOP BUTTON Use this button to set th e time when tu rning on the appliance for the first time or after a power failure, scroll through preset programs and t erminate cooking cycles.
Instructions for the User 26 4. USING THE O VEN 4.1 Precautions and General Advice When the oven is used for the first time, it should be heated to 200°C for long eno ugh to burn off any oily residues left by the manufacturing process.
Instructions for the User P5.5 or P3.0 for single-phase power connection. After selecting the appropriate power, press STOP to confirm the setting. N.B. This power setting operation only has to be carried out the first time the oven is connected. The value set is saved and automatically us ed whenever the oven is switched on after this.
Instructions for the User 28 To edit a humidified fan-mod e program by entering the parameters ex actly as required, turn the knob to one of the programs from P1 to P14. The display shows the parameters c ontained in the selected program. Hold down STOP for 2 seconds.
Instructions for the User The display shows UEnd . The parameters set are now saved i n the chosen program. Press START to display the pa rameters just set. Press START again to run the program just edite d. 4.8 Humidified fan-mode cooking Use the knob to select one of the preset programs (P1 – P14).
Instructions for the User 30 N.B. - during preheating and cooking, whenever the door is opene d the message "door" will appear on the display a nd a beep will sound to warn the user that the door must be clos ed while t hese operations are in progress.
Instructions for the User 4.10 Manual cooking Use the knob to select the manual program. The special feature of this user-edi table program is that the co oking parameters set are not retained in the memory when the k nob is turned to any other position.
Instructions for the User 32 4.13 Possible error messages on the display 4.13.1 Err1 This message appears whenever the so ft ware detects that the sensor connector is not properly connected to the electro nic circuit board or has short-circuited. This error resets automatically when the oven’s power su pply is switched off.
Instructions for the User 5. CLEANING AND MAINTENANCE Important: never point jets of water str aight at the oven and do not use h igh- pressure water cleaners.
Instructions for the User 34 5.2 Cleaning the inside of the oven To keep the oven in g ood condition, it must be clea ned regularly at the end of each day, after allowing it to cool. Remove all rem ovable parts. Remove the side runners by lifting them and sliding them off the supporting pins.
Instructions for the User 5.3 Door glazing The pane of glass in the oven door is very easy to clean since the inside window can be opened. This means that each pane of glass ca n be cleaned on both the inside and the outside. To open the inside pane, simply gently pull out the two points shown in figure 1.
Instructions for the User 36 6. EXTRA ORDINAR Y MAINTENANCE Occasionally, the oven will require minor servicing procedur es or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below.
An important point after buying a device Smeg ALFA201XE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg ALFA201XE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg ALFA201XE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg ALFA201XE you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg ALFA201XE will certainly help you make a decision on the purchase.
If you already are a holder of Smeg ALFA201XE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg ALFA201XE.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg ALFA201XE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg ALFA201XE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
