Instruction/ maintenance manual of the product Flow Sensor PFMV5 SMC Networks
Go to page of 3
Safety Instructions Flow Sensor Instruction Manual PFMV5 Series URL http : // www.smcworld.com Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. The descriptions of products shown in this document may be used by the other companies as their trademarks.
Specifications • Prepare maintenance space. • Do not drop or bump, or apply excess impact. • Do not pull the lead wire forcefully, not lift the product by pulling the lead wire. (Tensile force 49N or less). • Mount a sensor by observing the proper tightening torque.
Mounting and Installation (unit: mm) Mounting screw L-type bracket (Through hole) L-type bracket (T apped) Manifold mount (using ZS-36-A ) L-type bracket (Through hole) Mounting screw (M3 x 15L) L-type bracket (T apped) Thread tightening torque is 0.32 0.
An important point after buying a device SMC Networks Flow Sensor PFMV5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMC Networks Flow Sensor PFMV5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMC Networks Flow Sensor PFMV5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMC Networks Flow Sensor PFMV5 you will learn all the available features of the product, as well as information on its operation. The information that you get SMC Networks Flow Sensor PFMV5 will certainly help you make a decision on the purchase.
If you already are a holder of SMC Networks Flow Sensor PFMV5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMC Networks Flow Sensor PFMV5.
However, one of the most important roles played by the user manual is to help in solving problems with SMC Networks Flow Sensor PFMV5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMC Networks Flow Sensor PFMV5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
