Instruction/ maintenance manual of the product ST-2000 Smartek
Go to page of 12
1 Cord/ Cordless Steam Iron Operating Instructions Model No. ST-2000 PRECAUTI ONS -------------------------------------------------------------------------- 2 Safet y Information IMPORTANT SAFETY IN S.
SAFE USE OF THE IRON Your safety and the safety of others are very important 2 We have provided important safety messages in this manual. Always read and obey all safety messages. This is the safety alert symbol. It is used to alert you to potential hazards that can kill or injure you and others.
3 READ ALL INSTRUCTIONS BEFORE USING THE IRON 1. Use the iron only for its intended purpose, for ironing fabrics on board. 2. To protect against burns or injury to persons, do not iron or steam fabrics while being worn on the body. 3. The iron should always be turned “OFF” before plugging or unplugging from outlet.
SPECIAL INSTRUCTIONS To reduce the risk WARNING of electric shock or fire: 1. Do not operate another high wattage appliance on the same circuit, to avoid a circuit overload. 2. If an extension cord is absolutely necessary, use a cord rated a minimum of 10 amperes.
COMPONENTS IDENTIFICATION 5.
READ THIS INSTRUCTION BO OK THOROUGHLY BEFORE USING YOUR SMARTEK IRON TO BECOME FAMILIAR WI TH THE IRON FEATURES. HELPFUL IRONING TIPS The Temperature Selector Dial of the Smartek iron has dots.
HOW TO FILL WITH WATER Make sure the iron is turned off and the AC Power Cord is unplugged from the electrical outlet. The iron can be filled with the Detachable W ater Tank in place or removed. Set the Cord Switch to “Cordless” Remove the iron from the stand.
8 HOW TO USE AS A STEAM IRON 1. Fill the iron as described in “HOW TO FILL WITH WATER”. 2. Position the iron vertically and turn the Temperature Control Dial to the steam position. 3. Plug the AC Cord into the electrical outlet. 4. Set the Temperature Control Dial to the steam position.
Cord Ironing 1. Turn the cord switch to “Cord” 2. Lift the iron (with cord) from the stand . • NOTE : The indication light will turn on and off from time to time during the cord ironing. Cordless Ironin g 1. Turn the Cord to switch to “Cordless” 2.
10 CAUTION 1. Turn the iron off and unplug. 2. Empty the iron immediately after using. Do not store the iron with water in it. 3. Wait until the iron has cooled before storing it, and always set it on the Heel Rest to protect the soleplate from scratches, corrosion or stains.
FABRIC IRONING CHART 1. Check fabric for specific ironing instructions, always follow manufacturer’s instructions. 2. Iron blended fabrics at setting for lower-temperature fiber or for the highest –percentage fibers 3. Use caution, some synthetics may melt at high temperature .
Distributed By Smartek USA Inc., Brooklyn, NY 11206 www.smartekusa.com 12.
An important point after buying a device Smartek ST-2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smartek ST-2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smartek ST-2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smartek ST-2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Smartek ST-2000 will certainly help you make a decision on the purchase.
If you already are a holder of Smartek ST-2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smartek ST-2000.
However, one of the most important roles played by the user manual is to help in solving problems with Smartek ST-2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smartek ST-2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
