Instruction/ maintenance manual of the product ST-1200 Smartek
Go to page of 12
f - 1 - O p eration Maintenance General Information Steam Iron Operating Instructions Model No. ST-1200 Safet y Information PRECAUTI ONS ---------------------------------------------------------------.
SAFE USE OF THE IRON Your safety and the safety of others are very important We have provided important safety messages in this manual. Always read and obey all safety messages. This is the safety alert symbol. It is used to alert you to potential hazards that can kill or injure you and others.
- 3 - READ ALL INSTRUCTIONS BEFORE USING THE IRON 1. Use the iron only for its intended purpose, for ironing fabrics on board. 2. To protect against burns or injury to persons, do not iron or steam fabrics while being worn on the body. 3. The iron should always be turned “OFF” before plugging or unplugging from outlet.
- 4 - WARNING To reduce the risk of electric shock or fire 1. Do not operate another high wattage appliance on the same circuit, to avoid a circuit overload 2. If any extension cord is absolutely necessary, use a cord rated a minimum of 10 amperes CAUTION • Cord rated for less amperage may overheat, and should not be used.
- 5 - FEATURES: Cord protector Temperature indicator Temperature control dial Spray button Power steam button Variable steam control Water filling inlet Spray Nozzle Transparent water tank Teflon coat.
READ THIS INSTRUCTION BOOK THOROUGHLY BEFORE USING YOUR SMARTEK IRON TO BECOME FAMILIAR WITH THE IRON FEATURES. HELPFUL IRONING TIPS The Temperature Selector Dial of the Smartek iron has dots.
HOW TO FILL WITH WATER Make sure the iron is turned off and the AC Power Cord is unplugged from the electrical outlet. 1. Set the Variable steam knob to the ‘0’ position before filling t he iron with water. 2. Open the Water Fill Opening and fill the Tank up to the “MAX” Line on the tank.
HOW TO USE THE SPRAY Before using the spray feature, check the fabric label for ironing instructions because some fabrics may be spotted or stained with moisture. The spray feature is particularly helpful for removing stubborn wrinkles and where extra dampening is needed.
A FTER EACH USE 1. Turn the iron off and unplug. 2. Empty the iron immediately after using. Do not store the iron with water in it. 3. Wait until the iron has cooled before storing it, and always set it on the Heel Rest to protect the soleplate from scratches, corrosion or stains.
MAINTENANCE: SELF CLEANING IMPORTANT : Your iron will give the best ironing results and last longest if you apply the Self Cleaning once a month. 1. Fill the water tank up to half with water. 2. Position the iron on its rear heel. 3. Select the temperature control dial to ‘MAX’.
FABRIC IRONING CHART 1. Check fabric for specific ironing instructions, always follow manufacturer’s instructions. 2. Iron blended fabrics at setting for lower-temperature fiber or for the highest –percentage fibers 3. Use caution, some synthetics may melt at high temperature .
1 YEAR LIMITED WARRANTY All Smartek Products have a warrantee for 1 year from provable date of purchase against defects in material and workmanship. During this period such defects will be repaired, or the product will be replaced without charge. This warranty does not cover damage caused by misuse, negligence or improper installation.
An important point after buying a device Smartek ST-1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smartek ST-1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smartek ST-1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smartek ST-1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Smartek ST-1200 will certainly help you make a decision on the purchase.
If you already are a holder of Smartek ST-1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smartek ST-1200.
However, one of the most important roles played by the user manual is to help in solving problems with Smartek ST-1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smartek ST-1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
