Instruction/ maintenance manual of the product XP20-2000i Smart Technologies
Go to page of 12
X-Port ™ 20 Switch (XP20-2000i) Installation Guide for a 2000i with an NEC MT860 or NEC MT1060 Projector 99-00486-00 Rev B0.
FCC Warning This equipment has been te sted and found to comply with the l imits for a Cla ss A digital dev ice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pr otection agains t harmful in terference when th e equipment is operated in a com merc ial environment.
Contents Installing the X-Port 20 Sw itch in a 2000i -DV/DVX .......................... 1 To install the X- Port 20 switch .................................................................. 1 To connect a Guest Lapt op ................................
99-00486-00 Rev B0.
Installing the X-Port 20 in a 2000i with an NEC MT860 or MT1060 Projector These instructions show you how to: • install an X-Port 20 switch in a 2000i that’s equi pped with an NEC 860 or 1060 p rojector • connect a guest laptop The X-Port 20 unit is an RS-232 serial switch for con necting a laptop to the interactive whiteboard.
3. Remove the sticker covering the lower DB9 opening. Place the supplied lab el over this opening. DB9 Connector Open ing (S ti cker Rem oved) Suppl ied L abel 2000i (Back Leg Removed for Clarity) C o m p u t e r 2 4.
5. Carefully swing the Electronics tray down so it hangs vertically. Open Electronics Tray 6. Install the X-Port 20 switch on the studs in the Electroni cs Tray. Using a Phillips No. 1 screwdriver, secure it in place wi th the supplie d screws and washer s.
7. Unplug the DB9 cable from the serial controlle r an d plug it into the gender changer on the X- Port 20 switch. Unpl ug DB9 cabl e from her e Serial Co ntroller Plug DB9 cable int o gender changer X-Port 2 0 Swit ch 8. Attach the loose end of the DB9 female-femal e ribbon cabl e to the serial controller using the supplied screws.
9. If you don’t have a Room Control Module installed, attach the supplied MOD6 ca ble to the audio amplifier and the X-Port 20 switch. Then go to step 12.
11. Connect the supplied MOD6 cable to the audio amplifier and the X-Port 20 switch. Sup plied M OD 6 Cable 12. Swing the Electronics tray back to its origi nal position, and insert the two button head screws that you removed earlier. Avoid pinching any cables.
To connect a Guest Laptop 1. Extend the laptop end of the umbilical from the rear of the 2000i until it reaches the laptop/videoconferencing shelf. 2. Connect the three cables that comp rise the laptop end of the umbilical − the Computer 2 Audio, Computer 2 Video and Computer 2 Serial − to the appropriate connectors on the guest laptop.
X-Port 20 Switch Installation Guide for the 2000i 99-00486-00 Rev B0 8 Customer Support SMART’s Technical Supp ort team welcomes your call. However, you may want to conta ct your local reseller first if you experience problems with any SMART product.
An important point after buying a device Smart Technologies XP20-2000i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smart Technologies XP20-2000i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smart Technologies XP20-2000i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smart Technologies XP20-2000i you will learn all the available features of the product, as well as information on its operation. The information that you get Smart Technologies XP20-2000i will certainly help you make a decision on the purchase.
If you already are a holder of Smart Technologies XP20-2000i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smart Technologies XP20-2000i.
However, one of the most important roles played by the user manual is to help in solving problems with Smart Technologies XP20-2000i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smart Technologies XP20-2000i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
