Instruction/ maintenance manual of the product UF75/UF75w Smart Technologies
Go to page of 10
PLEASE THINK BEFORE YOU PRINT Knowledge base Maint aining your SMAR T UF75 or UF75w projector Cleaning the projector WA R N I N G Cleaning a wall-mounte d projector can result in a fall or injury . Use caution when climbing a ladder , and consider removing the projector from its wall- mounting bracket to clean it or to replace the projector lam p.
2 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR – If necessary , use a soft cloth mo istened with a mild detergent to clea n the projector housing. – For optim um performa nce, clean the projector e very 12 months. Increa se this frequency according to environment al conditions.
3 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR • When replacing the pr ojector lamp: – Put the projector into S tandby mode and wait 30 minute s for the lamp to cool completely . – Do not remove any screw s other t han those specified in the lamp replacement instructions.
4 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR TIP If the cover is difficult to remove, insert a flat screwdriver or small coin into the slot on the bottom of the lamp cover to gently pry the cover open. 5. Use a Phillips screwdriver to loosen the two captive screws from the bottom of the lamp module.
5 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR 9. Use the same att achment to vacuum the vents on either side of the projector .
6 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR 3. Access the service menu to reset the lamp hour counte r . See Resetting the lamp timer in your SMAR T Board interactive whiteboard system user’s guide . 4. Activate th e projector ’s alert e-mails and lamp war nings if they’ve been deactivated.
7 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR TIP Move the focus lever until it is almost in the locked position. The fric tion will help you to maint ain control when you’re moving the projector to the desired position. 3. Move the lock lever to the right to lock the projector .
8 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR T o adjust the vertical keystone of the proje cted image Loosen or tighten the lower screws on the pro jector mounting plate, turning both screws equally a quarter or half turn at a time.
9 | KNOWLEDGE BASE – MAINTAINING YOUR S MART UF75 OR UF75W PROJECTOR T o center the project ed image If the imag e is off center , u se a wrench to turn the adjus tment screw on the mounting base. • Rotate the adjustment screw clockwise to move the entire image to the left.
smarttech.com/support smarttech.com/contactsupport © 201 1 SMART T echnologies ULC. All rights reserve d. SMAR T Board, smarttech, the SMART logo and all SMART t aglines are trademark s or registered trademarks of SMART T echnologies ULC in the U .S.
An important point after buying a device Smart Technologies UF75/UF75w (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smart Technologies UF75/UF75w yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smart Technologies UF75/UF75w - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smart Technologies UF75/UF75w you will learn all the available features of the product, as well as information on its operation. The information that you get Smart Technologies UF75/UF75w will certainly help you make a decision on the purchase.
If you already are a holder of Smart Technologies UF75/UF75w, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smart Technologies UF75/UF75w.
However, one of the most important roles played by the user manual is to help in solving problems with Smart Technologies UF75/UF75w. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smart Technologies UF75/UF75w along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
