Instruction/ maintenance manual of the product UF75 Smart Technologies
Go to page of 11
PLEASE THINK BEFORE YOU PRINT Knowledge base Maint aining your SMAR T UF75 projector Maint aining your interactive whiteboard For information on maintainin g your interactive whiteboard, see your SMAR T Board™ interactive whitebo ard user ’s gu ide ( smarttech.
2 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR IMPORT ANT • When cleaning the inte ractive whiteboard system: – Wipe the exterior of the projector with a lint-free cloth. – If necessary , use a soft cloth mo istened with a mild detergent to clea n the projector housing.
3 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR • Once the area has been ve ntilated, thoroughly clean the area around the projector , and disca rd any edible items placed in tha t area because they cou ld be cont aminated. • Call your authorized SMAR T reseller ( smarttech.
4 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR 4. Remove the lamp cover from the proj ector , and then put it in a safe place. TIP If the cover is difficult to remove, insert a flat screwdriver or small coin into the slot on the bottom of the lamp cover to gently pry the cover open.
5 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR 8. Use a vacuum with a soft bristle attachme nt to gently clean the area, being careful not to touch any optica l com ponents. 9. Use the same att achment to vacuum the vents on either side of the projector .
6 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR NOTE Y ou should be able to place the lamp module into the projector easily without applying much force. 4. Use the Phillips screwdriver to tighten the captive screws. 5. Carefully replace the lamp cover .
7 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR T o remove the filter 1. Insert a flat he ad screwdriver under the center t ab and gently pry up one en d first and then the other end. 2. Remove and replace element, reinst all filter on projector .
8 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR 2. Square the top edge of the p rojected image with the top edge of th e interactive whiteboard’ s bezel or frame by moving the projector manually.
9 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR T o adjust the vertical keystone of the proje cted image Loosen or tighten the lower screws on the pro jector mounting plate, turning each screw equally a quarter or half tu rn at a time.
10 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR T o center the project ed image If the imag e is of f cent er , use a wr ench to turn the adjus tment screw on the mounting base. • Rotate the adjustment screw clockwise to move the entire image to the left.
www.smarttech.com/support www.smarttech.com/contactsupport INTERNAL ON LY 11 | KNOWLEDGE BASE – MAINTAINING YOUR SMART UF75 PROJECTOR The SMAR T UF75 Settings menu appears. 4. Select to confirm that the lamp hours are re set to zero. © 2011 SMA RT Technologies ULC.
An important point after buying a device Smart Technologies UF75 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smart Technologies UF75 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smart Technologies UF75 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smart Technologies UF75 you will learn all the available features of the product, as well as information on its operation. The information that you get Smart Technologies UF75 will certainly help you make a decision on the purchase.
If you already are a holder of Smart Technologies UF75, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smart Technologies UF75.
However, one of the most important roles played by the user manual is to help in solving problems with Smart Technologies UF75. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smart Technologies UF75 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
