Instruction/ maintenance manual of the product 710.0026 Smart Technologies
Go to page of 9
SmarTire LF Initiator Tool PN: 710.0026 Revision 1.2 Instruction Manual © Copyright 2006 SmarTire Systems Inc. Duplication of this document in whole or in p art for an y purposes other than those for which it was originally intended, without the written approval of Smar T ire Systems Inc.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 2 TABLE OF CONTENTS INTRODUCTION ................................................................................................................... ............. 3 OVERVIEW ..................
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 3 INTRODUCTION The SmarTire LF Initiator is a handheld tool designed to provoke da ta transmi ssions from SmarTire High Pressure Sensors.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 4 Learn: Press this button to make a sensor tran smit a ‘Learn’ transmission. Learn transmissions are used when reprogram ming sensor ID nu mbers into th e SmarTire receiver.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 5 For dual-wheel assemblies, position the LF Initiato r Tool approxim ately 1 inch (2.5 cm) away from the tire’s surface positio ned at the center of the outboard tire’ s sidewall opposite the valve stem.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 6 5. If a sensor ID number is al ready programmed in t he sele cted wheel position (indicate d by a filled in tire icon and an ‘X’ on the screen), t he ID number must b e erased before a new I D number can be programmed.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 7 SMARTIRE PRODUCT & SERVICE PART WARRANTY: EFFECTIVE NOVEMBER 15, 2005 This warranty is effective as of November 15, 2005 and su persede s all past warranties expressed by SmarTire Systems Ltd.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 8 j. Failures caused by improper installati on or im proper pri or repair including damage to Product by tire (tyre) removal or installation; k. Corrosion and rust; l. Tires (tyres) m. Failures due to dirt, snow, or ice build-up; n.
710.0026 R1.2 SmarTire LF Initiator Operating Instructions 9 may cause harmful interference to radio communi cations. However, there is no guarantee that interference will not occur in a particular installation.
An important point after buying a device Smart Technologies 710.0026 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smart Technologies 710.0026 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smart Technologies 710.0026 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smart Technologies 710.0026 you will learn all the available features of the product, as well as information on its operation. The information that you get Smart Technologies 710.0026 will certainly help you make a decision on the purchase.
If you already are a holder of Smart Technologies 710.0026, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smart Technologies 710.0026.
However, one of the most important roles played by the user manual is to help in solving problems with Smart Technologies 710.0026. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smart Technologies 710.0026 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
