Instruction/ maintenance manual of the product (XP20-2000i-B) Smart Technologies
Go to page of 14
99-00539-00 Rev B0 X-Port™ 20 Switch (XP20-2000i-B) Inst allation Guide for any 2000i Equipped with an NEC VT465 or VT560 Projector.
99-00539-00 Rev B0 FCC W arning This equipment has been tested and fo und to comply with the limits for a Class A digital devi ce, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agai nst harmful interference when the equipment is ope rated in a commercial environment.
99-00539-00 Rev A0 i Content s Installing an X-Port 20 Serial/Video Switch in a 2000i-D VS .................... .............. .............. ............ 1 To mount the X-Port 20 switch ..... ................ ................ ................ .......
ii 99-00539-00 Rev A0.
99-00539-00 Rev B0 Installing an X-Port 20 Sw itch in a 2000i 1 Inst alling an X-Port™ 20 Switch in a 2000i with an NEC VT465 or VT560 Projector These instructions show you how to: • install an X-.
2 Installing an X-Port 20 Sw itch in a 2000i 99-00539-00 Rev B0 2. Make sure the casters are locked and al l four anti-tip feet are extended. 3. Remove the stickers covering the lower DB9 opening and the u ppe r HD15 opening.
99-00539-00 Rev B0 Installing an X-Port 20 Sw itch in a 2000i 3 5. Carefully swing the electronics tray down so it hangs vertically . Open Electronics Tray 6. Familiarize yo urself with the componen ts of the supplied X-Port 20 switch. In particular , take note of the I²C input jacks an d the gender changer on the left side of the bottom card.
4 Installing an X-Port 20 Sw itch in a 2000i 99-00539-00 Rev B0 7. Unplug the DB9 cable from the serial con troll er and plug it into the gender changer on the bottom card of the X-Port 20 switch. Rerouting the DB9 Cable to the X-Port 20 Switch 8. Using a Phillips No.
99-00539-00 Rev B0 Installing an X-Port 20 Sw itch in a 2000i 5 1. Attach the loose end of the DB9 female-to-female ribbon cabl e to the serial controller using the two suppli ed machine screws. Secure the ribbon cable and serial cable in place, as shown be low , using two of the supplied tie wraps.
6 Installing an X-Port 20 Sw itch in a 2000i 99-00539-00 Rev B0 3. Connect the supplied 6" (15.2 cm) I²C cable between the audi o amplifier (e ither I²C jack) and the empty I²C jack on the botto m card of the X-Port 20 switch. Connecting the Au dio Amplifier to the X-Port Seri al/V ideo Switc h (Room Control Module In stalled) 4.
99-00539-00 Rev B0 Installing an X-Port 20 Sw itch in a 2000i 7 5. Locate the tie-wrapped bundle of cables runnin g along the unders i de of the cabinet. In this bundle is a video cable (labeled RBG 1 IN ) that connects directly to the RGB IN port on the projector .
8 Installing an X-Port 20 Sw itch in a 2000i 99-00539-00 Rev B0 8. Swing the electronics tray back to its or iginal position, and insert the two button he ad screws that you removed earlier .
99-00539-00 Rev B0 Installing an X-Port 20 Sw itch in a 2000i 9 2. T urn on the guest la ptop. 3. If it’s still unplugged, plug in the 2000i and press the Lamp On button on the Control Panel. 4. Press the Guest Laptop button on the Control Panel to swit ch to the guest laptop video source.
10 Installing an X-Port 20 Sw itch in a 2000i 99-00539-00 Rev B0 Customer Support Cont acting SMART T echnical Support SMART’s T echnical Support te am welcomes your call.
An important point after buying a device Smart Technologies (XP20-2000i-B) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smart Technologies (XP20-2000i-B) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smart Technologies (XP20-2000i-B) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smart Technologies (XP20-2000i-B) you will learn all the available features of the product, as well as information on its operation. The information that you get Smart Technologies (XP20-2000i-B) will certainly help you make a decision on the purchase.
If you already are a holder of Smart Technologies (XP20-2000i-B), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smart Technologies (XP20-2000i-B).
However, one of the most important roles played by the user manual is to help in solving problems with Smart Technologies (XP20-2000i-B). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smart Technologies (XP20-2000i-B) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
