Instruction/ maintenance manual of the product 42E66A Skyworth
Go to page of 24
Instruction Manual Instruction Manual 42E66A 42E66A.
-1- WARNINGS AND PRECAUTIONS ...............................................................2-3 CONTENT ........................................................................................................1 Antenna/Cable Connection ................
WARNINGS AND PRECAUTIONS -2- Read instructions before operating the set. Keep these instructions well for future reference. all the Warning The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be placed on top of the apparatus.
-3- Educate onto the children about the dangers of climbing furniture to reach the television or its controls. The apparatus should be provided with a restraining device such as a fixing point to facilitate restraining the apparatus from toppling forward.
BASIC FUNCTION 1. Embedded digital color gain control better brightness and reality . 2. Embedded 5-line comb filter . 3. 4. High class LED screen high brightness, high 5. 6 7. This T V can be used as a high-performance PC monitor it has a VGA interface.
Positioning The TV Set Install Display solid horizontal surface such as a table or For ventilation, leave a space of at least 10cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates.
2.Power Indicator / Remote Sensor 1.Power Button 3.Speakers 4.Program Up/Down Button 5.Volume Up/Down Button 6.Menu Button 7.Source Button 8.Standby Button 4 5 6 7 8 3 2 1 3 EXTERNAL SCHEMA TIC AND INST ALLA TION Front Panel Note : The graphics are for representation only.
EXTERNAL SCHEMA TIC AND INST ALLA TION Back Panel Note : The graphics are for representation only . -7- 1. HDMI1HDMI2HDMI3: Connect HDMI input signal from signal source such as DVD. 2. PC IN: Connect a PC via a VGA cable. 3. PC AUDIO IN: Au dio input when the signal is DVI timing.
Antenna /Cable Connection There are two kinds of in use. antennas VHF/UHF To TV VH F/UHF ANTENNA jack (75 ) TWO KINDS OF ANTENNA VHF TV ANTENNA UHF TV ANTENNA U/V MIXER No need to install adapter COAXIAL ANTENNA (Note 1) (Note 2) FLAT CABLE Need to install adapter 1.
Remote Control EXTERNAL SCHEMA TIC AND INST ALLA TION -9- 1.POWER( ) Press to turn the TV on or standby. 3.Picture Mode(P .M.) Press to select the desired picture mode. 4.Sound Mode(S.M.) Press to select the desired sound mode. 5.Zoom Press the desired picture format.
Remote Control EXTERNAL SCHEMA TIC AND INST ALLA TION -10- 20 21 22 23 24 20.Subtitle Press to open or close the subtitle. 21.EPG Press to display the current EPG information in DTV mode. 22.Favorite Channel(FA V.) Press to view your assigned favorite channels.
Remote Control EXTERNAL SCHEMA TIC AND INST ALLA TION -1 1- 27.TEXT Buttons(Option) Press to enter the teletext menu. CANCEL Press this button to return to TV program temporarily while searching for a T eletext page. When the search is done, the page number will be displayed on the upper left of the screen.
PERSONAL VIDEO RECORDING (PVR) 1.Please insert the external high-speed storage 2.Select the TV program and channel you wish to record. 3.Press [REC. ] button to enter PVR mode and start recording. PVR control bar on the screen You can select the appropriate settings required.
If you know the programming details: 1. In DTV mode and with a USB device properly plugged in, go to the channel that will broadcast the program you want to record. 2. Press the EPG button on your remote control to bring up the EPG interface. The channel you are watching will be highlighted on the screen that appears.
EPG stands for Electronic Program Guide. It is supplied by the program providers and offers information about the programs to be broadcast. Y ou can access it in digital mode by pressing the EPG button on the remote control.
EPG (Electronic Program Guide) Recorder Press the RED button to display the recorder menu (right) to see detailed information about the different ways of recording television programs onto a USB device. Info Press the GREEN button to show information about the selected program.
Picture Mode Adjusts the picture mode: Standard, Mild, Personal, Dynamic. " "" "" "" " "" "" "" Brightness , Contrast , Color , Tint and Sharpness can only be adjusted when Picture Mode is set to Personal .
MENU CONTROL Medium: Keep the original white Warm: Red : The user may customize the colour temperature.(Red/Green/Blue). Cool: Blue. Display Mode Seven modes are available including Just Scan, Auto, Panoramic, Zoom1, Zoom2,16:9 and 4:3. DNR Four modes of digital noise reduction are available including Off, Low, Middle and High.
MENU CONTROL -18- Auto Search Press / to select Auto Search, then press [OK] buttons Channel Settings Note: These settings are only available in and DTV+ATV mode. ATV , DTV CHANNEL Auto Search DTV Manual Search A TV Manual Search Programme Edit Signal Information Signal Information Show the quality and signal strength of the channel.
MENU CONTROL OSD Language Select you desired OSD language. Hearing impaired This function is prepared for the hearing impaired people. When the status is on, subtitles will show up on the screen. Setup Settings Country Change your local country setting.
MENU CONTROL -20- Set Password To se t your own password, first enter the old password, and then enter your new password twice, following the prompts as illustrated below . Advanced Settings SW. Update(USB) Update the firmware of this model. 1. Rename the latest firmware to "MERGE.
MENU CONTROL -21- PC Settings When "PC", the settings manually buttons buttons buttons buttons buttons size you connect VGA cable to the jacks of PC and select the signal source as screen menu will be activated. You can use the function to adjust the display automatically or .
NO PICTURE, NO SOUND 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure is working or turned on. 3. 4. Check the signal source. the outlet Check if the power plug is in poor contact with the outlet.
SPECIFICA TIONS Audio output power (L+R): Working voltage: Rated power consumption: Screen size - diagonal: Dimensions (W x D x H): Net weight: Screen resolution: System: Status displaying method: On .
An important point after buying a device Skyworth 42E66A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Skyworth 42E66A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Skyworth 42E66A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Skyworth 42E66A you will learn all the available features of the product, as well as information on its operation. The information that you get Skyworth 42E66A will certainly help you make a decision on the purchase.
If you already are a holder of Skyworth 42E66A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Skyworth 42E66A.
However, one of the most important roles played by the user manual is to help in solving problems with Skyworth 42E66A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Skyworth 42E66A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
