Instruction/ maintenance manual of the product WD-318 SkyLink
Go to page of 2
1. INTRODUCTION 2. SET UP CODE CONNECTORS AND ZONE CONNECTORS Door/Window Alert Model WD-318 3. POWER UP THE DOOR/WINDOW SENSOR AND RECEIVER After setting up all the connectors, b oth units are ready to be powered up.
5. OPERA TION 6. BUZZER VOLUME 8. LOSS OF SIGNAL INDICA TION Y ou can select the buzzer volume by switching the volume switch to “HI” or “LO” position.
An important point after buying a device SkyLink WD-318 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink WD-318 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink WD-318 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink WD-318 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink WD-318 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink WD-318, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink WD-318.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink WD-318. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink WD-318 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
