Instruction/ maintenance manual of the product wc-400 SkyLink
Go to page of 20
sk yl in kh om e. co m U s e r’ s M a n u a l W C - 4 0 0.
1 cONTENT INTRODUCTION ........................................................................................ SETTING UP THE IP CAMERA ..................................................................... FCC ........................................
2 Thank you for purchasing the Skylinkhome TM IP Camera, Model WC-400. Before proceeding, please ensure you have completed setting up of your Skylinkhome TM Internet Hub. Y ou should be able to operate your Skylinkhome TM Internet Hub from your Smartphone App or Web Browser on your computer .
3 STEP 1 – POwEr UP Plug in the power adapter to the IP Camera and the LAN cable from the IP cam- era to one of the open ports of your Wi router . Then click “Next”. The green LED on the IP Camera lens should ash. If the LED is off, check the LAN cable and power connection.
4 STEP 2 – SEarch IP camEra The IP Camera Wizard will look for the IP Camera that is connected to your net- work and it will be displayed on the screen. Click “Next” when you see the camera. Note: If you have multiple IP Cameras, it is strongly recommended that you setup one IP Camera at a time to avoid confusion.
5 STEP 3 – cONfIrm camEra IP SETTING This step shows you the IP setting of the camera. Y ou do not need to change any settings here if you only have one IP Camera. Y ou can simply click “Next”. Y ou will need to enter the user name and password of the camera.
6 STEP 4 – SETUP wIfI NETwOrk Y ou may now setup the Wi network name and password so the IP Camera can function wirelessly . Press “Scan” to locate the network. Then enter all the Wi Router info, such as the SSID network name, type, encryption type and password.
7 After count down, check the LED next to the IP Camera lens. If it ashes, the Wi connection successful, you may click “Exit”. It is stays off, the wi fail please verify the SSID / Passwo.
8 STEP 5 – VIEw IP camEra aND chaNGE SETTINGS Y ou have completed setting up the camera, and you may view the IP Camera with your web browser . Open the web browser and enter the IP address of your Internet Hub, that is the IP address on the back of the Internet Hub, in the format of xxxxx.
9 Select the type of device / browser you are using. Click “Sign In”. Y ou now see the image from the camera. Y ou should now change the user name and password of the camera.
10 Click “System Settings”, then “Users Settings”. Y ou will see the screen below and change the user name and password. Click “Set” after setting up the user name and password.
11 STEP 6 – SETUP camEra IN INTErNET hUb Y ou may now setup the camera in the Internet Hub. Open the Internet Hub Main Page on your web browser . On the main screen, select “Settings”. On the Settings page, scroll down to the bottom of the page and click “Camera Settings”.
12 STEP 7 – INPUT camEra INfO Y ou may now setup the camera to one of the zones that you have already setup. In this example, we are setting up the camera into the “Master Bedroom” zone. Y ou must setup at least one zone in order to have a camera for that zone.
13 STEP 8 – VIEw camEra IN INTErNET hUb The camera is now setup and you may see the live image by clicking the Camera button on the Internet Hub main screen. Then select Master Bedroom, you will see the live camera image. Y ou may select up / down / left / right to change the viewing angle.
14 Y ou can also view the camera image on the zone page. Go into the zone you set - up for the camera, and you will see the camera image and all other programmed devices in that zone. Y ou may set up additional cameras by following the same procedures.
15 fcc fcc This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfer - ence that may cause undesired operation.
16 warraNTY If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required.
17 NOTES ................................................................................ ................................................................................ ................................................................................
18 NOTES ................................................................................ ................................................................................ ................................................................................
sky linkhome .c om Wi rel ess C on t ro l E very w here ..
An important point after buying a device SkyLink wc-400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink wc-400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink wc-400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink wc-400 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink wc-400 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink wc-400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink wc-400.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink wc-400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink wc-400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
