Instruction/ maintenance manual of the product SG-18R SkyLink
Go to page of 2
1. INTRODUCTION Skylink ® Light Switch and Garage Door Receiver Model SG-18R In this package , you will find a garage door receiver and a red / black wire. 2. GARAGE DOOR RECEIVER INSTALLATION (CONT) 2 3 4 RED/BLACK WIRE RECEIVER Existing wires connected to garage door opener.
If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required. 10. WARRANTY You can add up to 15 transmitters as you want to control the same receiver.
An important point after buying a device SkyLink SG-18R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink SG-18R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink SG-18R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink SG-18R you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink SG-18R will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink SG-18R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink SG-18R.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink SG-18R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink SG-18R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
