Instruction/ maintenance manual of the product MD-318 SkyLink
Go to page of 2
1. INTRODUCTION ON/OFF/Dimming Control ON/OFF/Dimming Control MD-318 Model MD-318 TM Thank you for your purchase of a SkylinkHome ON/OFF/Dimming Control Model MD-318. This ON/OFF/Dimming Control allows you to wirelessly turn on and off, dim and brighten connected lights with the TM SkylinkHome lighting transmitters.
5. OPERATION (CONT) This receiver offers two optional states after powered on, choose the one which fits your requirement. 1. Power On - Light On: 1) You may use the wall switch to control the light as usual. When the wall switch is off, the light is off.
An important point after buying a device SkyLink MD-318 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink MD-318 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink MD-318 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink MD-318 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink MD-318 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink MD-318, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink MD-318.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink MD-318. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink MD-318 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
