Instruction/ maintenance manual of the product HU-318 SkyLink
Go to page of 20
Setup Guide HU-318 skylinkhome.com.
2 CONTENTS 1. Setup HU-318 1.1 Obtain the IP address of HU-318............... 3 1.2 Login HU-318 Main Page.......................... 4 1.3 HU-318 Network Setting............................ 5 1.4 Setup Portforward......................................
3 SETUP HU-318 2. Connect the power adaptor to the outlet and to the HU-318 hub 1. Connect the ethernet cable to the HU-318 hub and to your router 3. Y ou will see your IP address as well as the port number on the HU-318 > 192.168. x . xx :8081 192.
4 SETUP HU-318 1.2 SETUP HU-318 3. Click on “Settings” icon 4. Scroll down and click on “ Network Settings ” 2. Input the default user name admin and default password admin 1. Open the browser on your desktop and input your IP address http://192.
5 1.3 HU-318 NETWORK SETTINGS 1.3 SETUP HU-318 3. Now the HU-318 is rebooting 2. Uncheck the DHCP Client and Click on “ Save Cong ” 1. Ensure the DDNS Status is OK .
6 1.4 SETUP HU-318 If you want to control your devices/appliances outside your wi-network, you need to set up PORT FORW ARDING on your Router! T o do this visit http://www .portforward.com and enter the router brand and model found at the back of your router , into the search engine.
7 2.1 SETUP APP SETUP APP 2.1 APP DOWNLOAD 3. Run the App 3. Run the App 2. Install the Skylink App 2. Install the Skylink App 1. On your iphone , go to the App Store, and search “ skylink homecontrol ” 1.
8 2.2 APP NETWORK SETTINGS 2.2 SETUP APP 5. T ap on “ Back ” 3. T ap on “ 1 ” 4. Enter the following information: 1. T ap on “ Settings ” 2. T ap on “ Network Settings ” 1 2 3 4 5 6 7 1. Prole: Home 2. IP Address: xxxxx .my .skyhm.net or 192.
9 2.3 SETUP APP 4. T ap on “ Back ” 3. Enter Y our Zone Name: eg. Master Room and T ap on “ Rename ” 1. T ap on “ Zone Settings ” 2. T ap on one of the “ Unused ” buttons Zone Name: eg. Master Room, Living Room T ap on “Rename” to Save 1 2 SETUP APP 2.
10 SETUP APP 2.4 DEVICE SETTINGS 2.4 SETUP APP 6. T ap on the Button you created 7. Put your skylink receiver into programming mode and T ap on “ Learn ” 4. Enter Y our Device Name and T ap on “ Return ” 5. Select either ON/OFF or No-Dim/Dim and tap on “ Add ” 1.
11 2.5 SETUP APP 5. T ap on your “ Scene Name: eg.Movie ” 6. T ap on “ Zone ” 3. T ap on one of the “ Unused ” buttons 4. Enter your Scene Name and tap “ Rename ” 1. T ap on “ Settings ” 2. T ap on “ Scene Settings ” 1 2 Scene Name: eg.
12 2.5 SCENE SETTINGS SETUP APP 2.5 SETUP APP 12. T ap on “ Set ” 9. Select your Device, and T ap “ Done ” 1 1. Select “ % Brightness ” T ap “ Done ” 10. T ap on “ Brightness ” 7. Select your zone name T ap “ Done ” 8. T ap on “ Device ” 1 1 1 2 2 2 Select Zone Select Device eg.
13 2.5 SETUP APP 16. T ap icons to control the device, ON/OFF switch 14. T o add more devices to the same scene, repeat scene settings: steps 5-13 15. T ap on “ Scene ” 13. Set your Device into programming mode and T ap “ Learn ” to program ON OFF After Programmed, T ap on “ Home ” T ap on “ Learn ” 1 2 SETUP APP 2.
14 2.6 SETUP APP SETUP APP 2.6 TIMER SETTINGS 5. T ap on “ Return ” to Save the name 6. T ap on “ Zone ”, Select your zone and T ap “ Done ” to save 3. T ap one of the “ Unused ” buttons 4. Enter your T imer Name 1. T ap on “ Settings ” 2.
15 2.6 SETUP APP SETUP APP 2.6 TIMER SETTINGS 12. T ap on the “ On/Off ” button to program your action 9. T ap Hour , Select your Hour from the List and T ap “ Done ” to Save 1 1. Slide to activate/deactivate the Days 10. T ap Minute, Select your Minute from the List, T ap “ Done ” to Save 7.
16 2.6 TIMER SETTINGS SETUP APP 2.6 SETUP APP 1. Select “ On ” or “ Off ” 2. T ap “ Done ” to Save 17. Timer is now active 15. T ap on your T imer name 16. T ap on Activate Icon 13. T ap on “ On ” or “ Off ” depending on your desired action 14.
17 OPERA TION OPERA TION 4. T ap on the device you want to control and use the 4 buttons below to control 3. T ap on the Zone you want to control 1. T ap on the “ Zone ” button ON OFF BRI DIM.
18 PUTTING RECEIVER INT O PROGRAMMING MODE PUTTING RECEIVER INTO PROGRAMMING MODE Mini Screw-In Dimmer Model: LS-318 Start with dimmer off. Position the slide switch to the desired operating mode. Power on (by turning on the light switch or the circuit breaker).
.
skylinkhome.com Wireless Control Everywhere..
An important point after buying a device SkyLink HU-318 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink HU-318 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink HU-318 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink HU-318 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink HU-318 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink HU-318, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink HU-318.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink HU-318. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink HU-318 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
