Instruction/ maintenance manual of the product AA-433 SkyLink
Go to page of 8
ww w .skylinkhome.co m 3-001 9 6 Z 1 0 1 . N / P MODE L : AA-43 3 Audio Alar m US Patent no. 6243000B 1 CUSTOMER SERVIC E 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 T el : (800) 304- 1 18 7 Fax : (800) 286-132 0 Email : support@skylinkhome.
– 1 – SKYLINK TECHNOLOGIES INC. Y our G ui de to the Audio Alarm MODEL: AA-43 3 The AA-433 Audio Alarm contains all the above items. – 1 4 – ADDITIONA L ACCESSORIE S Audio Sensor (AS-433 ) - Detects alarm sound from existing security system alarm; sends signal to Dial-Alert.
– 2 – T ABLE OF CONTENTS OVERVIEW ......................................................................................... 4 P ACKAGE CONTENTS.......................................................................................4 INST ALLA TION.
– 3 – The Audio Alarm (AA-433) is designed to be used in conjunction with Skylink Security System (SC-10, SC-100 series, SC-1000 series) and any Skylink sensors/transmitters. When any of the Skylink Security Systems or sensors/ transmitters are activated, the siren of the audio alarm will sound at 1 10dB.
– 4 – INST ALLA TION Installation is done using the screws included. For your convenience, we have also included wall anchors and a template to aid in the installation of the Audio Alarm. How to use the template to help in the installation: 1. T ape the template to the wall where you would like the Audio Alarm to be 2.
– 10 – DELETE SENSORS AND TRANSMITTERS Y ou cannot delete one sensor/transmitter from the Audio Alarm at a time. Y ou must clear all the sensors and transmitters that are currently communicating with the Audio Alarm, then re-program the ones you want to keep.
– 6 – OPERA TION OF THE AUDIO ALARM – 9 – KEYP AD TRANSMITTER When the Keypad Transmitter (KP-434) is used in conjuction with the Audio Alarm, it functions the same as the Keychain Trans- mitter ( 4B-433A or 4B-434). Y ou are able to arm and disarm the audio alarm, activate the siren using the panic button, and turn on/off the chime mode.
Now that the system is installed and the sensors are communicating with the Audio Alarm, it is time to learn how to arm and disarm the Audio Alarm. The only way to arm and disarm the Audio Alarm is via the Keychain Transmitter and Keypad Control (option).
An important point after buying a device SkyLink AA-433 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SkyLink AA-433 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SkyLink AA-433 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SkyLink AA-433 you will learn all the available features of the product, as well as information on its operation. The information that you get SkyLink AA-433 will certainly help you make a decision on the purchase.
If you already are a holder of SkyLink AA-433, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SkyLink AA-433.
However, one of the most important roles played by the user manual is to help in solving problems with SkyLink AA-433. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SkyLink AA-433 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
