Instruction/ maintenance manual of the product ECD-T1540 Sirius Satellite Radio
Go to page of 28
ECD-T1540 SIRIUS SA TELLITE RADIO OPERA TING MANUAL MANU/SKIP P. S C A N 45W x 4 LO UD / ENTE R VO LUM E S-MOD SAT C A T Full Panel Det achable High Power FM/AM Stereo Receiver Comp act Disc Player ISO Mounting with Removable T rim Ring Sirius Function Remote Control Ready CD-R/R W Compatibility (English) SIRIUS OPERA TION…………….
SIRIUS OPERA TION 5 24 7 6 8 1 3 MAN U/SKIP P. S C A N 45W x 4 LO UD/ ENTER VOLUM E S-MOD SAT C A T SWITCHING TO SIRIUS MODE……………………..…(1) Press MOD button (1) to select Sirius mode.
SIRIUS MODE SEL ECTION ...........................…..(5) Press LOC/S-MOD button (5) to switch Category mode, Sk ip mode or normal. It is used as the selection of each: Normal Category mode Direct T une Skip Channel mode When Category mode or Skip mode is engaged, the “CATEGORY” or “SKIP” function is turned on in the display.
1 ECD - T1540 MANU/SKIP P.SCAN 45W x 4 LOUD/ ENTER VOLUME S-MOD SAT C A T Full Panel Detachable High Power FM/AM Stereo Receiver Compact Disc Player ISO Mounting with Remova ble Trim Ring Sirius Function (see separate booklet on Sirius Radio operation) Remote Control Ready CD - R/RW Compatibility (English) OPERATING INSTRUCTIONS …………… .
2 CONTENTS COMPACT DISC CARE .................................................................................................. 3 DIGITAL DISPLAY .........................................................................................................
3 COMPACT DISC CARE Dirt, dust, scratches and warpage can cause a deterioration in the sound or intermittent skipping some tra cks during play. • This unit has been designed to play compact discs bearing the identification logo shown on the left. No other discs can be played.
4 DIGITAL DISPLAY SAT Channel name indicator Category Stereo Local Radio Frequency, Time, CD Track Number, Audio Control Selected Mode CLASSIC Mono Skip SAT POP Loud Song title ROCK Channel name Artis.
5 DETACHABLE FRONT PANEL The front panel is designed to be removable for antitheft purposes. It is recommended that you remove and carry the front panel with you when you leave your car. HOW TO ATTACH THE FRONT PANEL Align the right side of the panel (A) with the stopper (B) , and then p ush the left side of the panel into the unit until it clicks.
6 GENERAL OPERATION 5 10 8 6 7 4 2 9 1 3 MANU/SKIP P.SCAN 45W x 4 LOUD/ ENTER VOLUME S-MOD SAT C A T TURNING THE POWER ON........................ Any button Install the front panel and press any button (except and button) when ACC is on. TURNING TH E POWER OFF .
7 e.g. When preset button is pressed. When BND/LOU D/ENTER button is pressed. When AS/PS/P.SCAN button is pressed. - BEEP ALL mode: The beep is generated when every button is pres sed. - BEEP OFF mode: The beep is disabled. MODE SELECTION ............
8 RADIO OPERATION 6 7 2 4 5 1 3 MANU/SKIP P.SCAN 45W x 4 LOUD/ ENTER VOLUME S-MOD SAT C A T SWITCHING TO RADIO MODE …………………… . … (1) P ress MOD button (1) to select radio mode, the radio mode appears in the display together with the memory band and frequency.
9 Repeat steps 1. and 2. to program additional stations. • Quick tuning .................... Select the desired band, then press one of the six preset buttons (5) . LOCAL/DISTANT SELECTION ........................... … .. (6) P ress LOC /S - MOD button (6) to set local or distant stations.
10 CD OPERATION 8 1 6 7 2 3 4 5 MANU/SKIP P.SCAN 45W x 4 LOUD/ ENTER VOLUME S-MOD SAT C A T LOADING AND EJECTING THE CD ……………… (1),(8) Insert a disc into the CD slot ( 1 ) and the CD player will start. Press the eject button (8) to eject a disc.
11 SCAN MODE (PLAYING THE BEGINNING OF EACH TRACK) ...................................................... (5) This function plays the first several seconds of each track sequentially. Press the SCN button (5) to begin the scan mode. To cancel this mode, press the SCN button (5) again.
12 CD CHANGER OPERATION 5 7 6 8 1 2 3 4 MANU/SKIP P.SCAN 45W x 4 LOUD/ ENTER VOLUME S-MOD SAT C A T SWITCHING TO CD CHANGER (CDC) MODE.......... (1) Press the MOD button (1) with the power on to select CD C mode. When the CD C mode is switched on, playback begins with the first CD that the CD changer detects.
13 SHUFFLE MODE......................................................... (6) This function plays the tracks on one CD or all CDs in the magazine in random order. • “Shuffle - playing” tracks Press the SHF button ( 6 ) to play the current disc in random order.
14 AUX MODE OPERATION 1 MANU/SKIP P.SCAN 45W x 4 LOUD/ ENTER VOLUME S-MOD SAT C A T SWITCHING TO AUX MODE....................................... (1) The unit has a pair of auxiliary input terminals (see WIRING figure on page 22) . T his allows you to listen to an auxiliary audio source (MP3, portable cassette player, etc) .
15 ERROR SI GNS If a problem should occur while operating the CD player, one of the following error signs may be displayed. Refer to the table below to identify the problem.
16 HINTS FOR PROPER AND SAFE OPERATION • Conde nsation Moisture can condense on the optical lens of the CD player during humid or rainy days, or after the car heater is turned on. If this occurs the disc player may not function properly. To remedy the situation, remove the disc from the unit and wait a pproximately one hour.
17 TROUBLE SHOOTING Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with the unit. Before having the unit serviced, refer to the troubleshooting chart below. Symptom Cause Solution The volume control is turned down.
18 ACCESSORIES AND HARDWARE INSTALLATION 1. BEFORE INSTALLATION When mounting the unit in a car, keep the unit as level as possible. If the unit mu st be mounted at an angle, due to the design of the vehicle, make sure the unit does not tilt by more than 3 0 0 .
19 2. INSTALLATION PROCEDURES When mounting the unit into a DIN – standard cutout (182x53 mm) in the dashboard or consol e, attach the provided Removable Trim Ring to the unit. 1. Insert the mounting bracket into the DIN - standard cutout (182x53 mm) in the dashboard or console.
20 ELECTRICAL CONNECTIONS WIRING CAUTION 1 . Antenna S ocket • Insert the plug from the antenna installed in you r vehicle into this socket. (If your vehicle has a dual antenna system, a dual antenna to single antenna cable adaptor may be required.) 2 .
21 4 . Ground W ire (Black) • Connect this wire to the vehicle chassis. 5 . Power Antenna/Amplifier Turn On (Blue /Red ) • Connect this wire to the control terminal of a Power Antenna or an external amplifier . • When not using a Power Antenna or an external amplifier, this wire is not connected.
22 LINE OUT CONNECTIONS • The unit has two pair s o f line out terminals (see WIRING figure above) . You can use a separate front or a separate rear channel amplifier to upgrade your system.
23 OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Factory Service Center at the user’s expense, unless specifically s tated otherwise in this warranty.
24 21605 Plummer Street Chatsworth, CA91311 ECD - T1540 . Issue Number 1. Printed in Hong Kong 88 - C 1 980 - 00.
21605 Plummer Street Chatsworth, CA91311 ECD-T1540. Issue Number 1. Printed in Hong Kong 4.
An important point after buying a device Sirius Satellite Radio ECD-T1540 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sirius Satellite Radio ECD-T1540 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sirius Satellite Radio ECD-T1540 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sirius Satellite Radio ECD-T1540 you will learn all the available features of the product, as well as information on its operation. The information that you get Sirius Satellite Radio ECD-T1540 will certainly help you make a decision on the purchase.
If you already are a holder of Sirius Satellite Radio ECD-T1540, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sirius Satellite Radio ECD-T1540.
However, one of the most important roles played by the user manual is to help in solving problems with Sirius Satellite Radio ECD-T1540. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sirius Satellite Radio ECD-T1540 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
