Instruction/ maintenance manual of the product Manual Grommet Machine PG20 Sinclair
Go to page of 8
Model PG-20 Manual Grommet Machine Operating Manual (800) 624-2408 (530) 626-9386 Fax (530) 626-5144 6686 Merchandise Way Diamond Springs, Ca 95619 www.
INTRODUCTION MANUAL MACHINE MODEL PG-20 FO R PLACING APPLICATIONS BY HAND The function of this machine is the placemen t of applications or to punch holes (interior diameter of tube grommet 8mm or 12mm) in materials that need these applications. Specially recommended for placing grommets and washers in: awnings, curtains, advertising signs, etc.
Installation of PG-20 Install grommet machine on secure table top with the front of machine base flush with table edge. Use four bolts with lock nuts/washers to secure machine. Adjusting both the cutting and the grommet pressure. ALWAYS ADJUST FIRST THE CUTTING PR ESSURE, NEVER TRY DO CUTTING AND SETTING AT THE SAME TIME.
In order to adjust the grommet pressure. - Insert grommet on die #3 as shown in figure 1 below. Make sure bottom of grommet is up above bottom of top di e. No washer is needed for 8mm grommets. For 12mm grommets, insert washer on die #4 as shown in figure 2.
Change Of Dies The PG-20 will take two die sets. If you want to change out sizes, you will need to replace parts. Please refer to the following diagrams.
Parts Schematic.
Schematic # Part # Description 30 PGR2030 Machine Head 31 PGR2031 Die Holder Pin 32 PGR2032 Driving Stem 33 PGR2033 Driving Stem Guide Wheel Pin 34 PGR2034 Driving Stem Guide Wheel 36 PGR2036 Eccentri.
NOTES.
An important point after buying a device Sinclair Manual Grommet Machine PG20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sinclair Manual Grommet Machine PG20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sinclair Manual Grommet Machine PG20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sinclair Manual Grommet Machine PG20 you will learn all the available features of the product, as well as information on its operation. The information that you get Sinclair Manual Grommet Machine PG20 will certainly help you make a decision on the purchase.
If you already are a holder of Sinclair Manual Grommet Machine PG20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sinclair Manual Grommet Machine PG20.
However, one of the most important roles played by the user manual is to help in solving problems with Sinclair Manual Grommet Machine PG20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sinclair Manual Grommet Machine PG20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
