Instruction/ maintenance manual of the product Duro Sinclair
Go to page of 12
DURO® STRIPPER Operating Manual Read before use and keep safe Table of Contents 1.0 Technical Data Page 2 2.0 Safety Page 2 3.0 Safety instructions Page 2 4.0 Maintenance Page 3 5.0 Use Page 4 6.0 Information about various floorings Page 5 7.0 Troubleshooting Page 5 8.
2 1.0 Technical data/technical description Power supply 120V AC Power consumption 2000W, 18A with current limitor Number of strokes 8500 strokes/min Sound pressure level 88 dB(A) Sound energy level 101 dB(A) Hand/Arm-Vibration 16 m/s2 Weight 35 lbs C o m e s w i t h D u r o ® Stripper, 2 rigid blades, safety goggles and tool kit.
3 Please make sure any user of the machin e is familiar with these instruc tions before work begins. 3.2 Danger while working with the machine The Duro ® Stripper is designed to the highest technical standards. Incorrect use can be dangerous! Use this machine only: - As instructed in this operating manual.
5.0 Use Starting Mount the long internal tube with 2 screws to the handle support. Telescope the outer tube over it. The length of the handle may be adjusted by sliding the outer tube. Place the handle into the e nd of the tube and latch the locking. For your safety the Duro ® Stripper comes with the blade not m ounted.
5 6.0 Information about various floorings Main applications of the Duro® Stri pper are carpets with foam backing, CV-flooring, PVC-floori ngs and light carpets. CV-floorings, PVC-floorings and carpets without foam backing Cut strips according to the blade widt h.
6 8.0 Spare Parts Duro Stripper Schematic # Pieces Description Part # 1 1 Striker Foot Casting D015221 3 1 Blade holder D015223 4 1 Bearing plate D015224 5 1 Drive shaft D015228 6 1 Grip frame D015227.
7 53 1 Air guide D015200 54 2 Cyl. screw D019523 56 1 Current Limitor T015236 58 1 Motorcase with carbon D015203 59 2 Carbon brush holder D01520 6 60 2 Carbon brush D014997 61 2 Carbon brush holder ca.
.
.
8 TURBO, EXTRO, SUPER, BRAVO, DURO & ECO STRIP PER SUGGESTED BLADE SELECTION BRAVO/DURO/ECO STRIPPER #10-4906 8”Rigid. Our standard blade for rem oval of vinyl, carpet, adhesive, etc. Bevel edge of blade should be up for concrete and down for wood sub-surfaces.
9 STANDARD WARRANTY SINCLAIR EQUIPMENT COMPANY’ S tools are warranted to be free of defects in workmanship and materials for a period of one year from the date of original purchase. Should any trouble develop during this one year period, re turn the com plete tool, freight prepaid, to SINCLAIR’S authorized Service Center.
10 NOTES.
An important point after buying a device Sinclair Duro (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sinclair Duro yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sinclair Duro - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sinclair Duro you will learn all the available features of the product, as well as information on its operation. The information that you get Sinclair Duro will certainly help you make a decision on the purchase.
If you already are a holder of Sinclair Duro, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sinclair Duro.
However, one of the most important roles played by the user manual is to help in solving problems with Sinclair Duro. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sinclair Duro along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
