Instruction/ maintenance manual of the product Cutting System Sinclair
Go to page of 7
1 Cutting System Operating Manual (800) 624-2408 (530) 626-9386 Fax (530) 626-5144 6686 Merchandise Way Diamond Springs, Ca 95619 www.sineqco.com.
2 Assembly, Operating and Service Instructions A. Important for your safety! All activities on and with this machine must be carried out in a m anner not endangering anyone. Above all, the following precautions must be observed: 1. The adjustable finger guard (512-120) may only be set as high as required for the thickness of the cloth.
3 D. Changing Blades 1. Before changing blades, always turn o ff the main switch and unplug the machine. 2. Remove the finger guard after l oosening the knurled nut (512-122). 3. Remove the grindstone assy by loosening the screw (512-91). 4. Loosen tension nut (512-115), then withdraw the tension spring (512-114) and the blade holder (512-113) 5.
4 G. Assembly of guide parts with hand lifting device I. Cutting off equipment: 1. Clamp the near-side support in cluding slide to the table top approx. 40-50cm from the left hand end. 2. Clamp the far-side support, incl uding slide and lifting strap to the table top exactly opposite the near-side support.
5 H. Operation I. Adjustment of length According to the length of clot h required to be cut off, move the end stop and clamping device from the center of the guide rail to the inner side of the end ra il until the distance corresponds to the required length of cloth.
6 Replacement Parts.
7 NOTES.
An important point after buying a device Sinclair Cutting System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sinclair Cutting System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sinclair Cutting System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sinclair Cutting System you will learn all the available features of the product, as well as information on its operation. The information that you get Sinclair Cutting System will certainly help you make a decision on the purchase.
If you already are a holder of Sinclair Cutting System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sinclair Cutting System.
However, one of the most important roles played by the user manual is to help in solving problems with Sinclair Cutting System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sinclair Cutting System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
