Instruction/ maintenance manual of the product SWF10832 Simpson
Go to page of 36
SWF10832 8.0 Kg Fr ont Load W asher Instruction Booklet.
CONTENTS CUSTOMER CARE AND SERVICE 2 Contents / Customer Care And Service SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL BEFORE FIRST USE DAILY USE WASHING HINTS INTERNATIONAL WASH CODE SYMBOLS CARE AND CLEANING TROUBLESHOOTING .................
Safety Information 3 SAFETY INFORMATION 1. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
4 Safety Information After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Product Description 5 PRODUCT DESCRIPTION 2. 1 Worktop 2 Detergent/Softener Dispenser 3 Control Panel 4 Door Handle 5 Door 13 Child Safety Device 14 Rating Plate 15 Drain Pump 7 6 Level Adjustment Fee.
CONTROL PANEL 3. 6 Product Description / Control Panel To remove the transit bolts. To adjust levelling legs. To connect the drain hose on the edge of a sink.
Control Panel 7 3.5 Rinse Plus Button 3.6 Night Cycle Button This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. Press it to add rinsing phases to a program. The indicator of this option comes on.
8 Control Panel 3.8 Start/Pause Button 3.7 Display and Door Lock Indicator To start the selected program, press the ‘Start/Pause’. To interrupt a program which is running, press the ‘Start/Pause’ to pause the machine. To restart the program from the point at which it was interrupted, press the ‘Start/Pause’ again.
Control Panel 9 3.11 Programs + Options Program; Temperature Cottons; 90 °C, 60 °C, 40 °C Cottons; 30 °C, Cold Wash Rinses Long Spin Spin Reduction, No Spin, Rinse Hold Stain, Eco, Quick Wash Prew.
10 Control Panel/Before First Use Program; Temperature Spin To spin the laundry and to drain the water in the drum; maximum load 8 kg. Type of load; Max. weight of load Cycle description Options can be combined Drain For emptying out the last rinse water in programs with the ‘Rinse Hold’ or ‘Night Cycle’ option; maximum load 8 kg.
Daily Use 11 DAILY USE 5. Connect the mains plug to the mains socket. Turn the water tap on. Step 1 - Setting A Program For Washing 5.1 Four Steps Start Up Guide 1 2 3 4 1. 4. 2. 3. Turn the program selector dial to the required program. Once you select a wash program, the program selected will stay at that position for the whole of the wash.
12 Daily Use Step 2 - Loading The Laundry 1. Before loading the laundry, please make sure: Empty pockets. Tie the cords. Fasten buttons. Close zippers. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 3. Open the door by carefully pulling the door handle outwards.
Daily Use 13 The detergent dispenser is divided into three compartments. Detergent Dispenser Drawer Step 3 - Using Detergent And Additives Compartment ‘SOFTENER’ Compartment ‘PREWASH’ This compartment is used for fabric conditioner and starching agent.
14 Daily Use To pause press Start/Pause. The indicator will start flashing. - Press the Start/Pause again. The program will continue. - 5.2 Interruption Of A Program 5.3 Changing A Program It is possible to change only some options after the program has started.
Daily Use 15 If the door lock indicator does not disappear, this means that the machine is already heating and the water level is above the bottom edge of the door or the drum is turning.
16 Washing Hints WASHING HINTS 6. Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 6.1 Sorting The Laundry 6.2 Temperatures 90°C 60°C 50°C 40°C 30°C Cold For normally soiled, colourfast garments (e.
Washing Hints 17 Rust : oxalic acid dissolved in hot water or a rust removing product used in cold water. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains : treat with bleach, rinse well (whites and fast coloureds only).
18 Washing Hints the wash load to turn grey, greasy clothes. sudsing, inadequate rinsing. reduced washing effect, Any fabric softener or starching additives must be poured into the compartment marked ‘ ’ before starting the wash program.
International Wash Code Symbols 19 INTERNATIONAL WASH CODE SYMBOLS 7. These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Bleach in cold water DO NOT bleach Bleaching Energetic wash Delicate wash Hand wash Max.
20 Care And Cleaning CARE AND CLEANING 8. You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
Care And Cleaning 21 Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse program without any clothes in the drum.
22 Care And Cleaning 3. Press the two levers and pull forward the drainage duct to let the water flow out. 4. When the container is full of water, put the drainage duct back again and empty the container. Do steps 3 and 4 again and again until no more water flows out from the drain pump.
Care And Cleaning 23 If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged. It is therefore a good idea to clean it from time to time. Remove the water inlet hose from the water tap. Remove the inlet hose behind the appliance.
24 Care And Cleaning If the machine is exposed to temperatures below 0°C, certain precautions should be taken. 8.9 The Dangers Of Freezing Turn off the water tap. 1. 2. Unscrew the inlet hose. 3. Put a bowl below the recess of the drain pump to collect the water that flows out.
Troubleshooting 25 The door has not been closed. (Error code: ) The plug is not properly inserted in the power socket. There is no power at the socket. Insert the plug into the power socket. Please check your domestic electrical installation. The Start/Pause button has not been pressed.
26 Troubleshooting Malfunction Possible cause Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. Reduce the detergent quantity or use another one. Reduce the detergent quantity or use another one. Redistribute laundry manually in the drum and start the spin phase again.
Troubleshooting 27 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
28 Technical Data TECHNICAL DATA 10. Dimensions Power supply (voltage/frequency) Total power absorbed Minimum fuse protection Water supply pressure Maximum load Spin speed 220-240 V/50 Hz 2200 W 10 A 0.8 MPa 0.05 MPa Maximum Minimum 1000 RPM 700 RPM Maximum Minimum Width Height Depth 59.
Installation 29 INSTALLATION 11 . 11.1 Unpacking You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. Use gloves. Remove the external film. If necessary, use a cutter. Remove the polystyrene packaging materials.
30 Installation Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. Use a spirit level on the top and side of the washing machine to check the levels.
Installation 31 Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. When the washing machine is levelled, try to rock it from corner to corner. If it does rock, adjust the legs again until it is levelled and does not rock.
32 Installation Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. When the appliance is installed the power supply cable must be easily accessible.
Environment Concerns 33 The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
NOTE.
.
www .simpson.com.au 147194897-001-352013.
An important point after buying a device Simpson SWF10832 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simpson SWF10832 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simpson SWF10832 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simpson SWF10832 you will learn all the available features of the product, as well as information on its operation. The information that you get Simpson SWF10832 will certainly help you make a decision on the purchase.
If you already are a holder of Simpson SWF10832, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simpson SWF10832.
However, one of the most important roles played by the user manual is to help in solving problems with Simpson SWF10832. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simpson SWF10832 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center