Instruction/ maintenance manual of the product SWF10732 Simpson
Go to page of 36
SWF10732 7.0 Kg Fr ont Load W asher Instruction Booklet.
CONTENTS CUSTOMER CARE AND SERVICE 2 Contents / Customer Care And Service SAFETY INFORMATION PRODUCT DESCRIPTION CONTROL PANEL BEFORE FIRST USE DAILY USE WASHING HINTS INTERNATIONAL WASH CODE SYMBOLS CARE AND CLEANING TROUBLESHOOTING .................
Safety Information 3 SAFETY INFORMATION 1. In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
4 Safety Information After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Product Description 5 PRODUCT DESCRIPTION 2. 1 Worktop 2 Detergent/Softener Dispenser 3 Control Panel 4 Door Handle 5 Door 13 Child Safety Device 14 Rating Plate 15 Drain Filter 7 6 Level Adjustment F.
CONTROL PANEL 3. 6 Product Description / Control Panel To remove the transit bolts. To adjust levelling legs. To connect the drain hose on the edge of a sink. Plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts.
Control Panel 7 3.1 Program Selector Knob Turn this knob to set a wash program, the machine will automatically select the spin speed and temperature for selected program. The selector knob can be turned either clockwise or anticlockwise. Position “ ” to reset program/ switching OFF the machine.
8 Control Panel 3.8 Start/Pause Button To start the selected program, press the ‘Start/Pause’. To interrupt a program which is running, press the ‘Start/Pause’ to pause the machine. To restart the program from the point at which it was interrupted, press the ‘Start/Pause’ again.
Control Panel 9 3.11 Programs + Options Program; Temperature Cottons; 90 °C to Cold Prewash; 90 °C to Cold Cottons Eco ; 60 °C to 40 °C White cotton (heavy soiled cotton items):e.
10 Control Panel/Before First Use Program; Temperature Spin Easy Iron; 40° C to Cold To spin the laundry and to drain the water in the drum; maximum load 7 kg. Synthetic or mixed fabrics, to be ironed underwear, coloured garments, non-shirnk shirts, blouses; maximum load 3.
Daily Use 11 DAILY USE 5. Connect the mains plug to the mains socket. Turn the water tap on. Step 1 - Setting A Program For Washing 5.1 Four Steps Start Up Guide 1 2 3 4 1. Turn the program selector dial to the required program. Once you select a wash program, the program selected will stay at that position for the whole of the wash.
12 Daily Use Step 2 - Loading The Laundry 1. Before loading the laundry, please make sure: Empty pockets. Tie the cords. Fasten buttons. Close zippers. Place the laundry in the drum, one item at a time, shaking them out as much as possible. 3. Open the door by carefully pulling the door handle outwards.
Daily Use 13 Powder or liquid detergent. 1 3 Position down : for liquid detergent. Position up : for powder detergent (factory setting). Position down : for liquid detergent. Position up : for powder detergent (factory setting). 2 Step 3 - Using Detergent And Additives Detergent Dispenser Drawer 1.
14 Daily Use To pause press Start/Pause. The indicator will start flashing. - Press the Start/Pause again. The program will continue. - 5.2 Interruption Of A Program 5.3 Changing A Program It is possible to change only some options after the program has started.
Daily Use 15 If the door lock indicator does not disappear, this means that the machine is already heating and the water level is above the bottom edge of the door or the drum is turning.
16 Washing Hints WASHING HINTS 6. Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 6.1 Sorting The Laundry 6.2 Temperatures 90°C 60°C 50°C 40°C 30°C Cold For normally soiled, colourfast garments (e.
Washing Hints 17 Rust : oxalic acid dissolved in hot water or a rust removing product used in cold water. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains : treat with bleach, rinse well (whites and fast coloureds only).
18 Washing Hints the wash load to turn grey, greasy clothes. sudsing, inadequate rinsing. reduced washing effect, Any fabric softener or starching additives must be poured into the compartment marked ‘ ’ before starting the wash program.
International Wash Code Symbols 19 INTERNATIONAL WASH CODE SYMBOLS 7. These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Bleach in cold water DO NOT bleach Bleaching Energetic wash Delicate wash Hand wash Max.
20 Care And Cleaning CARE AND CLEANING 8. You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
Care And Cleaning 21 8.7 Cleaning the drain filter Turn program selector dial to position Off ( ). Unplug the appliance. Open the door. To clean the drain filter: Disconnect the mains plug from the mains socket. Do not clean the drain filter if the water in the appliance is hot.
22 Care And Cleaning 2. Open the filter cover by pressing the special hook and by rotating the cover upwards. Hold filter securly and pull upwards to remove it from its position. Clean the filter under the water tap. After cleaning the filter, open the filter cover and insert the filter back to its position.
Care And Cleaning 23 IMPORTANT! Close the filter cover. Insert the mains plug again. The filter is inserted correctly when the indicator on this top is visible and you will hear “Click” sound. 7. 8. 9. Do not start washing clothes without the filter in its place.
24 Care And Cleaning If the machine is exposed to temperatures below 0°C, certain precautions should be taken. 8.9 The Dangers Of Freezing Turn off the water tap. 1. 2. Unscrew the inlet hose. 3. Remove the drain hose from the rear support and unhook it from sink or spigot.
Troubleshooting 25 The door has not been closed. (Error code: ) The plug is not properly inserted in the power socket. There is no power at the socket. Insert the plug into the power socket. Please check your domestic electrical installation. The Start/Pause button has not been pressed.
26 Troubleshooting Malfunction Possible cause Solution Too much detergent or unsuitable detergent (creates too much foam) has been used. Reduce the detergent quantity or use another one. Reduce the detergent quantity or use another one. Redistribute laundry manually in the drum and start the spin phase again.
Troubleshooting 27 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
28 Technical Data TECHNICAL DATA 10. Dimensions Power supply (voltage/frequency) Total power absorbed Minimum fuse protection Water supply pressure Maximum load Spin speed 220-240 V/50 Hz 2000 W 10 A 0.8 MPa 0.05 MPa Maximum Minimum 1000 RPM 700 RPM Maximum Minimum Width Height Depth 60 cm 85 cm 56 cm Programs Max.
Installation 29 INSTALLATION 11 . 11.1 Unpacking You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. Use gloves. Remove the external film. If necessary, use a cutter. Remove the polystyrene packaging materials.
30 Installation Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation. Use a spirit level on the top and side of the washing machine to check the levels.
Installation 31 Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. When the washing machine is levelled, try to rock it from corner to corner. If it does rock, adjust the legs again until it is levelled and does not rock.
32 Installation Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. When the appliance is installed the power supply cable must be easily accessible.
Environment Concerns 33 The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
NOTE.
.
www .simpson.com.au 147194896-001-352013.
An important point after buying a device Simpson SWF10732 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simpson SWF10732 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simpson SWF10732 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simpson SWF10732 you will learn all the available features of the product, as well as information on its operation. The information that you get Simpson SWF10732 will certainly help you make a decision on the purchase.
If you already are a holder of Simpson SWF10732, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simpson SWF10732.
However, one of the most important roles played by the user manual is to help in solving problems with Simpson SWF10732. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simpson SWF10732 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
