Instruction/ maintenance manual of the product PTM-27 Simpson
Go to page of 10
One Y ear Limited Warranty © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. OPERA TOR'S MANUAL Model PTM-27 PTM-27HD 4120 Dublin Blvd.
-18- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. ! Read This First ! Read This First ! Read This First ! Read This First ! ! Read This First ! R.
-17- -2- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. General Information ………………………………………………………… 3-4 .
-3- -16- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. This manual describes the proper use of the PTM-27 and PTM-27HD and the safe operating procedures for them; however , THINKING IS YOUR RESPONSIBILITY .
-15- -4- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. 1. F ASTENER SELECTION 1. The PTM-27 and PTM-27HD are designed to set three types of fasteners, drive pins, threaded studs and special assemblies such as drive pins with pre-assembled washers, conduit clips and ceiling clips.
-5- -14- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. W ARNING STUDY AND UNDERST AND THESE RULES BEFORE OPERA TING THESE TOOLS.
-13- -6- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. A. TRAINING 1. Remember you must obtain certification of training from an authorized Simpson Strong-Tie instructor .
-7- -12- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. GENERAL OPERA TING PROCEDURES OF THE PTM-27 AND PTM-27HD 1. Always point the tool away from yourself and all bystanders. 2. Never place your hand over the front (muzzle) end of the tool.
-11- -8- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. W ARNING HOW TO LOAD AND FIRE THE TOOL A. HANDLING THE PTM-27 AND PTM-27HD AND POWDER LOADS • NEVER leave a loaded tool unattended. Once the tool is loaded make the fastenings or unload the tool.
-9- -10- © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. © Copyright 2004 SIMPSON STRONG-TIE COMPANY INC. Fastening Module PTM-01102 PTM-01112 PTM-01114 PTM-01106 Strip, Feeding Module PTM-SF1 PTM-.
An important point after buying a device Simpson PTM-27 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simpson PTM-27 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simpson PTM-27 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simpson PTM-27 you will learn all the available features of the product, as well as information on its operation. The information that you get Simpson PTM-27 will certainly help you make a decision on the purchase.
If you already are a holder of Simpson PTM-27, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simpson PTM-27.
However, one of the most important roles played by the user manual is to help in solving problems with Simpson PTM-27. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simpson PTM-27 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
