Instruction/ maintenance manual of the product 52C850 Simpson
Go to page of 24
User manual Dishwasher 52C850 156998841.qxp 12/13/2006 3:33 PM Page 1.
2 Content Safety information - - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - - -5 Programme table - - - - - - - - - - - - - - - - - - -6 Before the first use - -.
Safety information In the interest of your safety and to ensure correct use, before installing and first using the appliance, read this user manual carefully , including its hints and warnings.
4 Installation ● Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier . ● All packaging must be removed before use. ● Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.
5 Control panel and functions Program selector dial and On/Off switch Start/Cancel button Finished light Program selector dial and On/Off switch ● when in this position, the machine is switched off .
6 Program Use Cycle description Program table Pots Heavy soil. Prewash - Main wash Crockery , cutlery , 2 intermediate rinses - pots and pans Final rinse - Dry Rinse & Hold Any . Prewash Partial load (to be completed later in the day). This program does not require the use of detergent.
7 Before the first use When using separately rinse aid and detergent: - fill up the rinse aid dispenser with rinse aid - fill up the detergent dispenser with detergent When using tablets that integrate rinse aid and detergent: - there is no need to fill up with rinse aid: place the tablets in the detergent dispenser .
8 Adjusting the dosage of rinse aid Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce the dose if there are whitish streaks on the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level.
9 Load cutlery . For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it). Place knives and other items of cutlery with sharp points or edges with their handles facing upwards. Risk of injury! Load the lower basket.
10 Adjusting the height of the upper basket IMPORT ANT! Only adjust the height when the upper basket is empty . When the basket is in the higher position you will not be able to use the cup racks. If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
11 Filling with detergent Open the lid. Fill in the detergent in compartment A. Observe the dosing levels. IMPORT ANT! Only use detergents suitable for dishwashers. Observe the manufacturer ’s dosing and storage recommendations. For programmes with prewash add an additional detergent dose in compartment B.
12 Cleaning and Care IMPORT ANT! NEVER use the dishwasher without filters as this may result in damage to the appliance. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters Clean filters A , B and C thoroughly under running water .
13 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc.
14 Something not working IMPORT ANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out a service technician.
15 The wash results are not satisfactory The dishes are not clean ● The wrong washing program has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to wrong arrangement of the load.
16 T echnical data Dimensions Width 60 cm Height 85 cm Depth (including control panel) 61 cm W ater supply pressure Minimum 50 kPa (7 psir) Maximum cold water 800 kPa (1 16 psi) Maximum hot water 350 .
17 T esting in accordance with AS/NZS 2007 must be carried out with the appliance fully loaded and using the test programme (see "Consumption values"). The rinse aid dispenser must be filled and the door must be opened at the end of cycle for 30 minutes for drying assessment.
18 Installation W ARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. W ARNING! This dishwasher may be fed with either hot (max. 60°) or cold water .
Ensure that the hoses are not kinked, crushed or entangled. W ARNING! ● Safety standards require the appliance to be earthed. ● Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed.
20 Fitting under a counter By removing the dishwasher ’s worktop, you can install it under a close fitting sink unit or a pre-existing top. Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.
21 W arranty FOR SALES IN A USTRALIA AND NEW ZEALAND APPLIANCE: Dishwasher This document sets out the terms and conditions of product warranties for Electrolux branded appliances.
22 Limitation of Liability 10. T o the extent permitted by law: (a) Electrolux excludes all warranties other than as contained in this document; (b) Electrolux shall not be liable for any loss or damage whether direct or indirect or consequential arising from your purchase, use or non-use of the Appliance.
23 156998841.qxp 12/13/2006 3:34 PM Page 23.
156 998 841 13/12 www .electrolux.com www .simpson.com.au Subject to change without notice 156998841.qxp 12/13/2006 3:34 PM Page 24.
An important point after buying a device Simpson 52C850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simpson 52C850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simpson 52C850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simpson 52C850 you will learn all the available features of the product, as well as information on its operation. The information that you get Simpson 52C850 will certainly help you make a decision on the purchase.
If you already are a holder of Simpson 52C850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simpson 52C850.
However, one of the most important roles played by the user manual is to help in solving problems with Simpson 52C850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simpson 52C850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
