Instruction/ maintenance manual of the product Snow Plow/Dozer Blade Simplicity
Go to page of 16
OPERATOR’S MANUAL 42” Snow Plow/Dozer Blade (42” Blade), Mfg. NO. 1691520 (Hitch Assembly), Mfg. NO. 1692240 i.
HEX CAPSCREW CARRIAGE BOLT Q .~,@--: @ PLAIN WASHER LOCKWASHER NUT HEX CAPSCREW IDENTIFICATION Shown below are actual size heads for standard screw sizes. Example: a l/4 screw has 7/16 head and thus requires a 7/16 wrench. To measure length, use the scale below.
Table of Contents STANDARD FASTENER IDENTIFICATION CHART ...................................................... Inside Front Cover SAFETY RULES General ...................................................................................................
safety Rules Read these safety rules and follow them closely. Failure to obey these rules could result in loss of con- trol of vehicle, severe personal injury to yourself or bystanders, or damage to property or equipment. The in the text signifies important cautions or warnings which must be followed.
42” Snow Plow/Dozer Blade PARTS ILLUSTRATION / _ .ySpring location fir garden tractors ,(see chart on page 6). Spring location for lawn tractors (see chart on page 6). gurei. Rd. NO. Qtv. A 1 B 1 C 1 D 2 E 1 F 2 G 4 H 1 COLLR. Set Description SPRING, Clip BAR ASSY.
42” Snow Plow/Dozer Blade ASSEMBLY 1. Place the blade on a flat surface. 2. install two bar stops (A, figure 2) using the two 5/l 6-l 8 x 1” taptite’screws (B). Figure 2. Bar Stop A. Bar Stop B. Taptite Screw, 5/l 6-l 8 x 1 3: Insert eyebolt (A, figure 3) thru.
42” Snow Plow/Dozer Blade 8. Assemble the chain (A, figure 4) to the tractor as follows: a. On left-hand side, remove the upper self-tapping screw that holds bumper to frame. This is the hole used for installing chain in the following steps, using one 5/16-18x l-114 capscrew (B), two 5/16 washers (D), and one 5/16 locknut.
42” Snow Plow/Dozer Blade 5. Raise the push bar and hook up the spring (A, fig- ure 6) in location B or C as follows: Location B Tractor (Series) 4000,5000,500,600, 12LT. 12RT. Resent I C I 6000,800, 16GTH, 17GTH I 6. Lower the push bar and tighten the capscrew and nut which hold chain to tractor frame.
42” Snow Plow/Dozer Blade 7. Insert front of push bar (A, figure 7) into pivot frame on rear of blade. Then install king pin (C) down thru holes in hitch and pivot frame. Secure king pin (C) with spring clip (D). 8. Using king pin as the pivot, swivel push bar to align holes for pivot pin (E).
42” Snow Plow/Dozer Blade REMOVAL 1. Lower the blade, 2. Remove blade and lii rod from push bar. 3. Raise push bar and unhook the spring (A, figure 6) from the chain. 4. Disconnect the lift rod from the lift lever on tractor by removing the spring clip.
42” Snow Plow/Dozer Blade Normal Care After dozing jobs, hose down the blade to remove excess dirt. Coat bare metal surfaces to prevent rust- ing. Lightly oil all pivot points.
42” Snow Plow/Dozer Blade Skid Shoes Alternate holes are provided to permit adjustment of the shoe assemblies for raising and lowering the blade to various working heights (see figure 11). When cleaning snow from gravel or earth drives or walks the shoe assemblies should be lowered fully to prevent blade contact with gravel or ground.
42” Snow Plow/Dozer Blade NOTES 11.
42” Snow Plow/Dozer Blade NOTES 12.
TORQUE SPECIFICATIONS FOR STANDARD MACHINE HARDWARE TOLERANCE 4096 SEE SAE GRADE R SAEGRADE#5 SAEGRADEII) 0 Q Q h/Lb. In./Lbs. InJLbs. FtJLbs. Nm. FtJLbs. Nm. FtJLbs. Nm. a-32 19 2.1 30 3.4 41 4.8 8-38 20 2.3 31 3.5 43 4.9 lo-24 27 3.1 43 4.9 80 8.8 lo-32 31 3.
SIMPLICITY MANUFACTURING, INC. SIMPLICITY MANUFACTURING, INC. FORM 1709932 FORM 1709932 500 N. Spring Street 500 N. Spring Street PRINTED IN U.S.A. PRINTED IN U.
An important point after buying a device Simplicity Snow Plow/Dozer Blade (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity Snow Plow/Dozer Blade yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity Snow Plow/Dozer Blade - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity Snow Plow/Dozer Blade you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity Snow Plow/Dozer Blade will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity Snow Plow/Dozer Blade, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity Snow Plow/Dozer Blade.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity Snow Plow/Dozer Blade. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity Snow Plow/Dozer Blade along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
