Instruction/ maintenance manual of the product Snow Cab 1694921 Simplicity
Go to page of 10
SNOW CAB #1694921 FOR Regent, LT 200 Series, 500 Series Lawn Tractors, 2500 Series Lawn Tractors PARTS LIST – ASSEMBLY INSTRUCTIONS IMPORTANT ! READ THIS MANUAL CAREFULLY AND KEEP FOR FUTURE REFEREN.
WARNING This cab is designed to provide foul weather protection only. It does not provide protection from noise, exhaust fumes, chemic als or injury from collision, roll-over or other accidents. 1. Do not operate machine in c onfined areas without proper ventilation 2.
For Replacement Parts and Accessories Contact: Original Tractor Cab Co., Inc. P.O. Box 97 6849 W. Front St. Arlington, IN 46104 Phone 765-663-2214 Fax 765-663-2101 Email Sales@originalcab.com Visit us on the web to see our other products. www.originalcab.
Carton Contents: Snow Cab #1694921 Key # Part # Qty. Description 1 11594 1 Front Panel Frame 2 11593 2 Foot 3 11595 1 Foot Pocket Guard, RH 4 11596 1 Foot Pocket Guard, LH 5 10004 2 Front Post 6 10002.
Step 1; See Figure 1: Identify the steel parts by using Figure 1. 1 2 2 3 5 6 7 8 9 10 11 13 Figure 1 14 12 4 5 5.
Step 2; See Figure 2 & 2A: 1 Install Front Panel Frame (1) A. Remove the bolt at reference A on both sides of the tractor. Place the Front Panel Frame over the dash from behind. Insert two 5/16” x 1 1/4” bolt inwards through the holes in the Front Panel Frame Legs.
Step 4; See Figure 4: Install right & left Front Posts (5) and right & left Top Frame Braces (6 & 7). Note: Bent ends of Top Frame Braces will point rearwards and lay flat w hen properly installed.
Step 6; See Figure 6: Install right and left Rear Posts (10 & 11) and right and left Rear Boxing Posts (12 & 13). NOTE: When properly installed Rear Post latch plates will face forward with the notch to the outside . A. Insert a 1/4” x 3/4” bolt outwards through the Rear Cross Bar, right Rear Post and then the right Boxing Post,.
Step 8: See Figure 8: Figure 8 Install the Doors for frame / door alignment. A. Follow the instructions in the Door Hardware Package to install the Door Bottoms and the Door Latches. B. Install, close and latch both Doors. C. Tighten all bolts from previous steps at this time.
Step 10: See Figure 10: Install Rear Curtain (15). A. Lay the rod sewn into the vinyl over the rear of the Top Frame. Clos e the snap flaps at the corners. B. Close the snap flaps over the Rear Posts and Rear Cross Bar. C. Secure the ties to the Rear Cross Bar.
An important point after buying a device Simplicity Snow Cab 1694921 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity Snow Cab 1694921 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity Snow Cab 1694921 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity Snow Cab 1694921 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity Snow Cab 1694921 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity Snow Cab 1694921, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity Snow Cab 1694921.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity Snow Cab 1694921. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity Snow Cab 1694921 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
