Instruction/ maintenance manual of the product REGENT 500 Simplicity
Go to page of 60
Parts Manual Rev. 2/1995 TP 400-1399-02-RG-SMA (Includes TP-1401 & TP-1402) R EGENT / 500 / 2500 S ERIES L AW N T RACTORS & M OWER D ECKS 12.5 HP G EAR T RACTORS Mfg. No. Description 1692401 Regent 12.5HP Gear 1692405 Regent 12.5HP Gear (Export) 1692409 512G, 12.
© Copyright 1995 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA.
FRAME ................................................................................................................................................................2 FRONT AXLE ........................................................................
2 Frame NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents **2405 3 20 6 31 30 40 36 31 30 30 42 31 42 16 19 18 13 17 37 29 4 29 25 26 38.
1 158399 2 RING, Retaining 2 960171 1 WASHER 3 1654707 1 BRACE, Seat 4 1654783 1 SUPPORT, Clutch 5 1655076 2 BRACE, Axle Support 6 1655591 1 BAR, Draw 7 1656754 1 BAR, Support 8 1656755 1 ARM, Support 9 1656791 1 SUPPORT, Hood (Gear models only) 10 1664034 1 SUPPORT, Axle 11 1664847 2 SCREW, Taptite, 5/16-18 x 3/4 (Qty.
4 Front Axle 16 17 11 8 3 28 18 23 4 8 3 3 27 22 23 14 20 3 27 25 24 9 6 5 4 20 6 24 25 15 13 19 21 7 2 11 10 26 1 12 Ref. No. 7 includes Ref. Nos. 2 & 3 Torque to 45-62 ft. lbs. Lube spindle thru fittings with grease (2 places) Gear Models See Steering & Front Wheel Group Torque to 15-25 ft.
1 1 SUPPORT ASSY., Axle, Rear (See Ref. No. 12) 2 1 AXLE SUB ASSY. (See Ref. No. 7) 3 176440 4 BUSHING 4 921133 2 FITTING, Lube, Drive Type 5 1611703 1 SPINDLE ASSY., RH 6 1611705 2 SPACER 7 1611708 1 AXLE ASSY., Front (Incl. Ref. Nos. 2 & 3) 8 1611710 2 KLIPRING, Ext.
6 Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **51 13 9 2 19 18 3 6 7 12 11 17 1 2 10 2 15 4 5 16 8 2 16 Coat gear teeth with grease. Torque to 13-19 ft. lbs. Torque to 17-23 ft.
1 1 LINK, Drag (Not Serviced Separately. See Ref. No. 14) 2 176440 5 BUSHING 3 1652743 1 BASE PLATE, Steering 4 1667513 1 TOP PLATE, Steering 5 1667622 1 KEY 6 1668927 1 LOCKNUT, Center, 3/8-24 7 1674076 1 ROD, Steering 8 1675388 1 GEAR, Steering 9 1686651 1 STEERING WHEEL, 13-1/2" (Incl.
8 Engine NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **271 Apply sealant to threads. Locknut to engine. 8 1 28 4 15 16 5 27 12 22 25 22 23 1 1, 13 19 24 18 17 18 17 14 20 26 17 21 10 7 22 25 22 25 23 2, 3 9 6, 25 2, 3 RH Rear on Gear Models (Zinc pltd.
1 * 1 ENGINE, 12.5 HP 2 158499 2 STOP, Belt (Hydro models) 3 172844 2 STOP, Belt (Gear models) 4 920427 1 LOCKWASHER, Ext., 3/8, Zinc Pltd. 5 960241 2 RIVET, Pop, 1/4 6 960361 1 SCREW, Taptite, 3/8-16 x 2, Zinc Pltd.
10 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **2370 Gear T ransaxle 16 31 24 30 9 28 33 41 35 37 42 15, 39 Attach to inside of rear.
1 * 1 TRANSAXLE, 5 Speed, Peerless Model 930-039 2 158499 2 BELT STOP 3 905123 1 KEY, Woodruff, #9 4 1663180 1 SPACER 5 1666631 1 SUPPORT, Transmission, Front 6 1666632 2 SUPPORT, Transmission, Rear 7 1666638 1 LINK, Shift, Lower 8 1666693 1 PULLEY ASSY.
12 Hydro T ransaxle - Group 1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **2566 20 26 29 30 16 8 2 27 21 5 19 23 24 9 12 30 32 31 1 10 5 22 6 4 7 11 28 4 3 17 14 15 20 28 13 See Rear Wheels & Tires for assy.
1 157127 1 SPRING, Conical 2 170164 1 V-BELT 3 172844 1 BELT STOP 4 960202 8 WASHER, Plain, 3/4 x 1-5/8 x 1/8 5 1666632 2 SUPPORT, Transmission, Rear 6 1667191 2 SPACER 7 1686613* 1 TRANSMISSION, Hydro Hydro Gear Model 318-0500 8 1707933 1 FAN 9 1709271 1 LEVER, Tow Valve 10 1709786 1 PULLEY ASSY.
14 Hydro T ransaxle - Group 2 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **2567 10 13 12 13 12 21 19 16 8 22 15 24 12 21 5 21 2 14 2.
1 1666697 1 SPACER 2 1704428 4 BUSHING 3 1707424 1 SPRING, Torsion 4 1709227 1 SPACER 5 1709775 2 BRACE, Shift Panel 6 1709776 1 ROD, Shift 7 1709777 1 SHIFT ROD ASSY.
16 Brake & Clutch - Gear Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **50 Between frame & head of stud (Ref. No. 2) 21 20 2 22 23 25 26 4 14 22 23 10 28 19 18 13 27 15 12 32 30 1 9 31 16 24 11 17 7 24 3 Idler Assy.
1 157041 1 SPRING, Compression 2 157273 1 STUD 3 159106 1 SPRING, Tension 4 1653076 1 IDLER ASSY. 5 1656852 1 PEDAL, Foot 6 1656854 1 PLATE, End 7 1657222 1 GUIDE ASSY., Rod 8 1659907 1 DAMPER, Rubber 9 1663138 1 GUIDE, Rod 10 1666294 1 SPACER 11 1666656 1 ROD, Brake 12 1666759 1 SPRING, Return 13 1677135 1 GUARD, Spring 14 1685150 1 PULLEY ASSY.
18 Brake & Clutch - Hydro Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **2568 18 20 2 12 10 13 1 24 19 21 9 14 16 17 22 23 27 29 29 11 15 26 7 26 28 25 26 19 21 5 4 3 26 28 4 Transmission Brake Arm Apply anti-seize lubricant to Ref.
1 156302 1 SPRING, External 2 159106 1 SPRING, External 3 1666759 1 SPRING 4 1663114 2 BUSHING, Plastic 5 1674669 2 SPACER 6 1707289 1 PULLEY, Idler 7 1708029 1 PULLEY, "V" 8 1709097 1 SPRING 9 1709780 1 ROD, Clutch 10 1709783 1 ROD, Return 11 1709789 1 IDLER ARM ASSY.
20 Electrical - Gear Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **2413 14 31 10 20 27 28 13 18 22 34 17 35 3 35 23 16 34 9 8 16 2 26 24 25 17 6 4 11 5 1 29 30 29 7 19 21 33 12 Slide boot over termi- nal after securing to battery.
1 122023 1 COVER, Terminal 2 122184 1 SWITCH, Headlight 3 165073 1 CLIP 4 172434 1 CLIP, Cable 5 930222 1 CLIP, Wire 6 932747 1 TIE, Self-Locking 7 1603618 1 CABLE, Ground 8 1665237 1 WIRE ASSY. 9 1665238 1 CIRCUIT BREAKER 10 1669831 1 HOLD DOWN, Battery 11 1674358 1 WIRE ASSY.
22 Electrical - Hydro Models 9 15 32 19 22 12 29 28 30 6 33 32 21 11 **2412 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Place end of hose thru hole in frame. 31 23 18 20 25 10 5 17 35 24 4 3 26 27 2 13 34 16 30 31 7 1 8 Apply grease to ignition switch terminals (Ref.
1 122023 1 COVER, Terminal 2 122184 1 SWITCH, Headlight 3 165073 1 CLIP, Wire 4 172434 1 CLIP, Wire 5 932747 1 TIE, Cable (Qty. 3 used on hydro models) 6 1603618 1 CABLE (Positive) 7 1665237 1 WIRE ASSY. 8 1665238 1 CIRCUIT BREAKER 9 1669831 1 HOLD DOWN, Battery 10 1674358 1 WIRE ASSY.
24 Hood, Grille, Dash & Fuel T ank NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **2424 2 27 45 37 36 12 18 15 35 24 17 13 14 26 29 33 44 33 32 34 28 22 38 19 21 20 3 43 10 42 41 9 7 42 39 1 23 6 8 44 11 16 44 30 25 Torque to 20-30 in.
1 1 FUEL TANK (See Ref. No. 11) 2 171252 1 CAP, Fuel Tank 3 173206 1 FILTER, Fuel 4 1654930 1 BUSHING 5 1664897 1 WASHER, Foam 6 1665301 1 BRACE 7 1666447 1 FITTING 8 1676861 1 HOSE, Fuel (Cut to 12" long) 9 1667248 4 CLIP, Canoe 10 1672123 2 EDGING, Lower Dash 11 1685297 1 TANK ASSY.
26 Seat & Deck NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents. **1307 15 17 21 18 1 1 8 24 29 5 30 7 19 20 27 23 9 14 28 27 11 27.
1 930222 2 CLIP 2 1666690 2 SPRING, Seat 3 1666691 2 COVER, Wire 4 1668839 1 PANEL, Shift (Gear models) 5 1678415 2 HINGE, Lower 6 1701229 1 BUSHING, Snap 7 1701252 2 SEAT LATCH ASSY.
28 Front Wheels & Tires NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. Grease front wheel assemblies.
1 172353 2 VALVE STEM & CAP 2 912808 2 FITTING, Grease 3 960202 2 WASHER, 3/4 4 1611710 2 KLIP RING, 3/4 5 1664090 2 TUBE, Front Wheel, 4.10/3.50-6 6 1673333 2 HUB CAP (AGCO & Massey Ferguson models only) 7 1709856 2 FRONT WHEEL & TIRE ASSY.
30 Rear Wheels & Tires NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. 5 6 7 1 9 3 4 9 2 8 Qty.
1 172353 2 VALVE STEM & CAP 2 927794 2 E-RING 3 1676519 2 HUB CAP (AGCO & Massey Ferguson models) 4 1701435 2 RETAINER, Hub Cap (AGCO & Massey Ferguson models) 5 1709857 2 REAR WHEEL & TIRE ASSY., Metallic Gray, 18 x 8.50-8 (Incl. Ref.
32 Decals - Simplicity Models NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents. 11 14 13 6 3 2 17, 18, 19 17, 18, 20 12 4 10 9 8 7 1 5 Located on LH side of wrapper to the right of the release lever.
1 1 DECAL, OPEI (Not Serviced) 2 1656855 1 DECAL, Mower Height 3 1668202 1 DECAL, Simplicity 4 1701270 1 DECAL, Warning, Fan (Hydro models) 5 1704276 1 DECAL, Danger, Rotating Blade 6 1702944 1 DECAL,.
34 Decals - AGCO Allis Models NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents. 14 17 16 13 2 6 5 1 4 8, 10, 17 9, 1 1,16 15 3 12 7, 18 Located on LH side of wrapper to the right of the release lever.
1 1 DECAL, OPEI (Not Serviced) 2 1656855 1 DECAL, Mower Height 3 1701270 1 DECAL, Warning, Fan, (Hydro models) 4 1701270 1 DECAL, Danger, Rotating Blade 5 1704277 1 DECAL, Danger, Deflector in Place 6.
36 Decals - Massey Ferguson Models NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents. 9 11 10 14 14 2 6 5 1 4 16, 18 15, 17 3 8 7, 13 Located on LH side of wrapper to the right of the release lever.
1 1 DECAL, OPEI (Not Serviced) 2 1656855 1 DECAL, Mower Height 3 1701270 1 DECAL, Warning, Fan, (Hydro models) 4 1704276 1 DECAL, Danger, Rotating Blade 5 1704277 1 DECAL, Danger, Deflector in Place 6.
38 36" Mower Deck - Deck, Arbor & Blades NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents.
1 108202 4 BEARING 2 927793 1 E-RING 3 960171 1 WASHER, Nylon 4 1603205 1 SHAFT, Roller, Center 5 1655729 2 ARBOR HOUSING, Top 6 1655777 2 ADAPTOR, Blade 7 1655839 1 PULLEY ASSY.
40 36" Mower Deck - Deck, Arbor & Blades NOTE: Unless noted other- wise, use the standard hard- ware torque specification chart. See the Table of Contents.
43 1930584 1 CAPSCREW, Hex Hd., 7/16-14 x 2-3/4 44 1930585 2 CAPSCREW, Hex Hd., 7/16-14 x 3-1/2 45 1931211 2 NUT, Hex, Flange, Whizlock, 3/8-16 46 1931277 9 NUT, Hex, Flange, Whizlock, 5/16-18 47 1931.
42 36" Mower Deck - Clutch & Roller Support NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents.
1 1 QUADRANT (See Ref. No. 21) 2 108157 2 CLEVIS, Adjusting 3 108512 1 PIVOT 4 108662 1 GUIDE ASSY., Rod 5 108717 2 SPACER 6 154177 1 SPACER 7 159159 2 SPRING 8 163103 1 SPRING 9 171320 1 ROD, Clutch .
44 36" Clutch & Roller Support Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents.
41 1919326 4 WASHER, Plain 42 1920564 6 CARRIAGE BOLT, 5/16-18 x 1-1/4 43 1921971 1 CAPSCREW, Hex Hd., 3/8-16 x 1-3/4 44 1922755 2 WASHER, Plain 45 1923087 2 PIN, Clevis 46 1923220 2 CARRIAGE BOLT, 3/8-16 x 1-1/4 47 1923362 1 LOCKNUT, Hex, 5/16-18 48 1924856 4 SCREW, Hex Hd.
46 36" Mower Deck - Roller & Misc. Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents. **56 16 5 11 1 15 15 15 15 15 1 1 15 15 15 1 4 4 4 3 2 2 14 6 13 7 8 12 9 16 10 Assemble rolllers with ribs to inside as shown.
1 153124 4 RING, Retaining 2 156306 2 PIN 3 176012 2 CLIP, Safety 4 1668487 4 ROLLER 5 1668744 1 ROD, P.T.O. 6 1669241 1 CHAIN, Lift 4 Links 7 1673574 1 PIN, Rivet 8 1673575 1 CLEVIS, Pin 9 1685243 1 ROD, Lift 10 1713549 1 V-BELT, Mower Drive 11 1918448 1 PIN, Cotter, 3/32 x 1 12 1920161 1 NUT, Jam, 5/16-18 13 1921333 1 CAPSCREW, Hex Hd.
48 Gear T ransaxle Service Parts - Peerless Model 930-039 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents.
1 772107B 1 Transaxle Cover (Incl. 85) 2 780086 2 Needle Bearing 3 770102A 1 Transaxle Case 4 776260 1 Countershaft 5 776219A 1 Output Shaft & Pinion 6 778139 1 Output Gear (35 teeth) 7 778136 1 S.
50 Gear T ransaxle Service Parts - Peerless Model 930-039 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents.
41 790019 1 Brake Lever 42 792073 1 Screw, 1/4-20 x 1-1/4" 42A 792085A 1 Screw, 1/4-20 x 2-1/4" 43 792075 1 Locknut, 5/16-24 44 790025 1 Brake Pad Holder 45 786066 1 Spacer 46 786086 1 Brake.
52 Hydro T ransaxle Service Parts - Hydro Gear Model 318-0500 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See the Table of Contents.
1 1709907 1 ARM, Bypass 2 1709908 1 SEAL 3 1709909 2 PUCK, Dampener 4 1709910 1 SETSCREW 5 1709911 1 ARM, Control 6 1709912 1 SPRING 7 1709913 1 CUP WASHER 8 1709914 1 SCREW, Socket Hd.
INDEX Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. A-1 108157 2-43 108202 1-39 108512 3-43 108662 4-43 108717 5-4.
INDEX Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. A-2 INDEX 1674358 10-23 1674669 5-19 1676375 10-11 1676519 3-3.
INDEX Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. Part No. Ref. No. & Page No. A-3 1714055 26-21 1714055 27-23 1714320 16-27 1714363 14-37 17.
.
T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.
An important point after buying a device Simplicity REGENT 500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity REGENT 500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity REGENT 500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity REGENT 500 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity REGENT 500 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity REGENT 500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity REGENT 500.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity REGENT 500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity REGENT 500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
