Instruction/ maintenance manual of the product 755M Simplicity
Go to page of 22
Parts Manual Rev. 10/2001 TP 400-2561-00-IW-S I NTERMEDIA TE S NO W THR O WERS 555 S NO W THR O WERS Mfg. N o. Description 1693980 555M, 5 HP Manual Start 1693981 555M, 5 HP Manual Start (Export) 755 S NO W THR O WERS Mfg.
© Copyright 2001 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA. MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.
1 TP-400-2561-00-IW-S T able of Contents SNOWTHOWER COMPONENTS P AGES Handles and Controls Group .....................................2 Frame and Engine Group...........................................6 Auger Drive and Impeller Group..................
2 TP-400-2561-00-IW-S Handles and Controls Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985917 Apply adhesive to secure grips. Ref. 29 required on slotted holes only. Shift rod assembly (Ref. 20) must pivot freely on pivot blocks (Ref.
3 TP-400-2561-00-IW-S Handles and Controls Gr oup 1 1668525 2 ROD, Control, Lower 2 1669323 2 SPRING, Extension 3 1916621 4 NUT, Hex, #10-24 R.H. 4 1715132 1 CLUTCH ROD, Auger Drive 5 1722636 1 HANDLE, R.H. (Auger Control side) 6 1722638 1 LEVER, Auger Clutch, R.
4 TP-400-2561-00-IW-S Handles and Controls Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985917 Apply adhesive to secure grips. Ref. 29 required on slotted holes only. Shift rod assembly (Ref. 20) must pivot freely on pivot blocks (Ref.
5 TP-400-2561-00-IW-S Handles and Controls Gr oup 51 1718793 1 SUPPORT, Gear 52 1960518 2 NUT, Push 53 1960252 4 CARRIAGE BOLT, 1/4-20 x 5/8 G5 54 1718593 2 GEAR, Steel, Universal (Supersedes Plastic .
6 TP-400-2561-00-IW-S Frame and Engine Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985620 Attach to Frame Right rear only. Engine Use upper square hole on 5 HP and lower square hole on 7 HP. Required on rear engine bolts only.
7 TP-400-2561-00-IW-S Frame and Engine Group 1 1921515 2 CAPSCREW, Hex Hd., 5/16-24 x 3/4 2 1924874 1 WASHER, 5/16 3 1715136 1 BELT STOP 4 1920427 2 LOCKWASHER, External Tooth, 3/8 5 * 1 555M 5 HP ENG.
8 TP-400-2561-00-IW-S Frame and Engine Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. E985919 Attach to Frame Right rear only. Engine Use upper square hole on 5 HP and lower square hole on 7 HP. Required on rear engine bolts only.
9 TP-400-2561-00-IW-S Frame and Engine Group 44 1720237 1 SPRING, Extension 45 920438 1 NUT, Hex, Jam, 5/16-24 46 924819 1 KEY, Hi-Pro, 1/8 x 5/8 47 1674325 1 PULLEY, Engine - Traction Drive 48 1960619 2 SET SCREW, Hex Socket Cup Point, 5/16-18 x 5/16 49 1720313 1 PULLEY, Engine - Auger Drive 50 905850 1 KEY, Parallel, 3/16 x 3/16 REF NO.
10 TP-400-2561-00-IW-S A uger Drive and Impeller Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985496 Apply a bead of gasket eliminator into rear seal groove and flat surface just past groove (Ref. 15 & 20) on both halves.
11 TP-400-2561-00-IW-S A uger Drive and Impeller Group 1 1715091 1 PULLEY,Auger Drive 2 1930540 2 SETSCREW, Square Head Cup Point, 3/8-18 x 5/8 3 905123 3 KEY, Woodruff 3/16 x 3/4 4 1960474 1 SETSCREW.
12 TP-400-2561-00-IW-S A uger Housing and Chute Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 985918 Place Ref. 3 between chute and deflector. Seal must cover openings at hinge pivot. Coat top and bottom of chute ring with grease.
13 TP-400-2561-00-IW-S A uger Housing and Chute Group 1 1670578 1 KNOB 2 1919326 1 WASHER, Flat, 5/16 3 960210 1 WASHER, Nylon 4 1706085 2 DECAL, Hinge, Orange 5 1715115 1 CHUTE & DEFLECTOR ASSEMBLY 6 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4 7 1960126 2 NUT, Push Pas, 1/4 8 1612455 1 CHUTE, Guard 9 1925205 4 CAPSCREW, Hex Hd.
14 TP-400-2561-00-IW-S T raction Drive Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 984936 Apply loctite to screws and torque to 55 - 60 in-lbs (2 places). Pack groove with grease. Apply locktite and torque to 8 - 10 ft.
15 TP-400-2561-00-IW-S T raction Drive Gr oup 1 1930601 3 CAPSCREW, Taptite, 5/16-18 x 5/8 2 1673994 1 BRACKET 3 1916950 1 NUT, Hex, 3/8-16 4 1916965 1 LOCKWASHER, 3/8 5 1669256 1 SHIFT ARM ASSY, w/Bushing 6 1666114 1 BUSHING 7 1924940 1 WASHER 8 1923701 1 CAPSCREW, Hex Hd.
16 TP-400-2561-00-IW-S Decals Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. B985924 D ANGER 1716532 Seal must cover openings at hinge pivot. 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 10 10 6 12 11 The above parts group applies to the following Mfg.
17 TP-400-2561-00-IW-S Decals Group 1 1715557 1 DECAL, Speed Selector 2 1722640 1 DECAL, Auger Control 3 1722643 1 DECAL, Warning / Main Dash Panel 4 1715558 1 DECAL, Simplicity Logo 5 1714107 1 DECAL, 755 5 1714108 1 DECAL, 555 6 1722674 1 DECAL, Danger, Discharge Chute 7 1716532 1 DECAL, Danger, Auger 8 * 1 DECAL, OPEI (Not Serviced) 9 * 1 I.
18 TP-400-2561-00-IW-S Wheels and Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 984933 4 3 1 6 5 2 The above parts group applies to the following Mfg. Nos.: 1693980 555M, 5HP Manual Start 1693981 555M, 5HP Manual Start (Exp.
19 TP-400-2561-00-IW-S Wheels and Tires Group 1 1666969 2 KLIK-PIN 2 172353 2 VALVE STEM & CAP 3 1664090 2 TUBE, Tire 4 1715125 2 *WHEEL 4 1723286 2 **WHEEL 5 1715126 2 *TIRE 5 1723287 2 **TIRE 6 1715124 2 *WHEEL & TIRE ASSEMBLY, (Includes Ref.
T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.
An important point after buying a device Simplicity 755M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity 755M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity 755M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity 755M you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity 755M will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity 755M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity 755M.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity 755M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity 755M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
