Instruction/ maintenance manual of the product 1694286 Simplicity
Go to page of 10
1 Installation Instructions Sub-Frame Hitch Mfg. No . 1694286 For Prestige / 1800 / 2800, Conquest / 1700 / 2700, & Broadmoor / 1600 / 2600 Series Tractors This kit is required when installing front mounted snowthrowers.
2 Installation Instructions Sub-Frame Hitch F ront Pulley - T wo-Stage Snowthro wer Application Early Manual Lift Only (See Instructions) Hydraulic Lift 28 27 25 33 40 41 39 38 37 36 43 32 42 33 25 29.
3 Sub-Frame Hitch Installation Instructions Ref Part No. Qty. Description 1 1723292 1 SHAFT & HOOK ASSY 2 1653768 1 CLAMP, Support 3 1931335 4 CARRIAGE BOLT, 5/16-18 x 1 4 1919381 4 WASHER, 11/32 5 1917356 3 LOCKWASHER, 5/16 6 1917372 4 NUT, 5/16-18 7 105249 1 PIN, Round Head, 3/8 x 2-3/8 8 1724025 1 LIFT LEVER ASSY.
4 Installation Instructions Sub-Frame Hitch Figure 2. Install Support Clamp A. 5/16-18 x 1 Carriage Bolt D. 11/32 Washer B. Hook Assembly E. 5/16 Lockwasher C. Support Clamp F. 5/16-18 Nut B C D E A F B C D E A F Figure 3. Front Pulley - Two-Stage Applications A.
5 Sub-Frame Hitch Installation Instructions Figure 4. Assemble Lift Rod A. Lift Rod C. Spring B. Set Collar D. Rod Guide B C D B A Assemble Lift Rod 1. Install the set collars (B, Figure 4), spring (C), and rod guide (D) on the lift rod (A) as shown. Final adjustment of the set collars will be made after the hitch and attachment are installed.
6 Installation Instructions Sub-Frame Hitch Figure 8. Install Hitch A. J-Hooks C. Hook B. Hitch Rod D. Clamp Plate A B C D Install Hitch 1. Slide the hitch under the tractor. 2. Raise the rear of the hitch and place the hook (C, Figure 8) over the lift shaft.
7 Sub-Frame Hitch Installation Instructions Install Lift Rod 1. Slide the lift lever (A, Figure 9) onto the end of the tractor lift shaft (B) under the right side footrest. 2. Use the tabs on the lift lever (A) to capture the tractor lift arm. Secure in place with a clevis pin (D) and safety clip (C).
Installation Instructions Sub-Frame Hitch REMO V AL 1. Disconnect the lift rod from the attachment and lift lever extension (B, Figure 12). 2. Remove the clevis pin and clip from the lift lever (B) and remove the lift lever. 3. Remove the front hitch rod (A).
9 Sub-Frame Hitch Installation Instructions A F C D G Figure 14. Lift Link - Manual Lift Models A. Pin B. Rear Hole of Lift Bar (Snowthrower Applications) C. Spacer D. Hair Pin Clip E. Upper Hole (Snowthrower Applications) F. Slot of Lift Link (Mower Applications) G.
Installation Instructions Sub-Frame Hitch Form No. 1724154-0 4 Rev. 11/2002 © 2002 Simplicity Manufacturing, Inc. All Rights Reserved TP 200-3507-0 4 -AT-SMA MANUFACTURING, INC.
An important point after buying a device Simplicity 1694286 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity 1694286 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity 1694286 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity 1694286 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity 1694286 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity 1694286, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity 1694286.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity 1694286. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity 1694286 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center