Instruction/ maintenance manual of the product 1693207 Simplicity
Go to page of 28
How to use this file...(Operators Manuals) ————————————————————————————————————————————––– Instructions for Print Vendors (Paper Manuals) Paper Size: * 11 x 17 * Body—50 lbs brilliant white offset or equivalent.
THIS PAGE INTENTIONALLY BLANK.
OPERA T OR’S MANU AL Rear Tine Tiller 5HP Rear Tine Tiller Mfg. No. Description 1693705 5HP Rear Tine Tiller 6HP Rear Tine Tiller Mfg. No. Description 1693704 6HP Rear Tine Tiller 8HP Rear Tine Tiller Mfg.
Simplicity Manufacturing, Inc. 500 N. Spring Street • P.O. Box 997 Port Washington, Wisconsin 53074-0997.
Page 1 T able Of Contents T ABLE OF CONTENTS ............................................... 1 OPERA TION SAFETY ................................................. 2 Owner's Responsibility .............................................. 2 Cautions and Impor tant Notes .
Page 2 Operation Safety SECTION CHECKLIST Owner's Responsibility Cautions and Impor tant Notes Impor tant Saf ety Instructions OWNER'S RESPONSIBILITY Safe and effective use of the rototiller is the owner's responsibility . 1. Read and follow all safety instructions.
Page 3 Operation Safety OPERA TION • Never operate the tiller without guards, covers, and hoods in place. • Ne ver star t the engine or oper ate the tiller with the wheels in the free-wheel position. Make sure the wheel lockouts are engaged through wheel hubs and wheel axle.
Page 4 Safety Signs & Decals SAFETY DECALS Safety warning decals are placed at strategic locations on the equipment as a constant reminder to the operator of the most impor tant precautions. All warning, caution and instructional messages on your equipment should be carefully read and obey ed.
Page 5 Features Handlebar Swivel Lever Drag Stake Wheel Lockout Reverse Belt T ension Adjustment Console Forward Belt T ension Adjustment Reverse Handle Belt Cover Engine Oil Fill Plug Handlebar Tilt .
Page 6 Controls SECTION CHECKLIST Drive Control Levers Reverse Handle Engine Controls DRIVE CONTROL LEVERS Engage wheels and tines into forward, releasing returns machine to neutral. Pulling down on drive control levers engages the wheels and tines. Releasing drive control levers disengages the wheels and brings the tiller to a complete stop.
Page 7 Controls REVERSE HANDLE (616RT) Engages wheels and tines in reverse. Pulling reverse handle back towards operator reverses tiller . Drive Control Levers Released Reverse Handle CAUTION Extreme caution should be used when operating rototiller in the reverse direction.
Page 8 Controls ENGINE CONTROLS Throttle Control Mov e throttle control to f ast position to star t and run the engine. T o stop the engine, mo ve to idle position, then to off. Choke Control Put choke control in choke position if engine is cold. A warm engine requires less choking than a cold engine.
Page 9 Adjustments SECTION CHECKLIST Wheel Lockouts Handlebar Adjustments (Tilt & Swivel) Drag Stake Belt T ension Adjustment WHEEL LOCK OUTS (616R T) Place wheels in tilling position. 1. Pull knob in center of wheel out, away from machine. 2. Rotate knob and lockout to align with slot on axle, release knob .
Page 10 HANDLEB AR ADJUSTMENTS (616RT) Tilt handlebars up or down, swivel 30 ° left or right. T o Tilt Up or Do wn: 1. Push down on handlebar tilt lev er . 2. While holding tilt lever down, adjust handlebars to a comf or table height by mo ving up or down.
Page 11 DRA G ST AKE Tilling depth is controlled by the height of the drag stake. T o adjust tilling depth. 1. Remove detent pin. 2. Raise the drag stake to position tines at chosen tilling depth. 3. Align hole in drag stake with hole in depth regulator bracket and replace detent pin.
Page 12 Operation SECTION CHECKLIST Pre-Star t Inspection Star ting and Stopping the Engine Tilling PRE-ST ART INSPECTION 1. Make sure all safety guards are in place and all nuts and bolts are secure. 2. Check oil level in engine crankcase. See your engine manual for procedure and specifications.
Page 13 ST AR TING AND ST OPPING THE ENGINE T o Star t Engine: 1. Drive control levers should be released to neutral position. 2. T ur n fuel shut-off valv e (if equipped) 1/4 tur n to open . 3. Push choke lever to choke position. 4. Move throttle control lever to fast position.
Page 14 Operation TILLING 1. Adjust the drag stake to desired tilling depth. NO TE: Raise drag stake up one hole at a time, testing tiller operation after each raise. Raising drag stake too high can result in loss of control of tiller! 2. Move the throttle control to fast .
Page 15 Tips TILLING TIPS The key to successful tilling is to begin with a shallow cut on the first pass, and then work an inch or two deeper on each successive pass.
Page 16 SECTION CHECKLIST Check F orward Belt T ension Change Forward/Reverse Belt Check or Fill Engine Crankcase Check Tiller T r ansmission Grease Check Tire Pressure Lubrication Engine Maintenance .
Page 17 CHANGE FOR W ARD/REVERSE BEL T NO TE: Change rever se belt on Model 616RT onl y . 1. T ur n off engine. Engine m ust be cool. 2. Remove spark plug wire from spark plug. 3. Remove belt guard. ✮ remove the forward belt from the forward engine pulley: - gently pull the engine recoil rope to rotate the pulley .
Page 18 Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99. Engine is shipped from factory without oil. Y o u must add engine oil before starting engine. Adapted from Briggs & Stratton Corporation, Form No. 274263-10/99. * Air cooled engines run hotter than automotive engines.
Page 19 CHECK TILLER TRANSMISSION GREASE Check the grease le v el annually . T o check the g rease level: 1. Move tiller to level ground. 2. Remove grease level dipstick located on the front transmission co ver . Correct 00 grease lev el is indicated between the high and low levels on the dipstick.
Page 20 ENGINE MAINTENANCE Ref er to the engine manual included in your parts pack et for inf or mation on engine maintenance. Y our engine manual provides detailed information and a maintenance schedule for performing the following tasks: 1. Check oil level before each use or after every 8 hours of operation.
Page 21 PREP ARE FOR ST ORA GE Follow the steps below to prepare your tiller for storage. Read your engine manual for detailed instructions on preparing the engine for storage. 1. Protect wheels and axles from rust: - Loosen locking bolt inside wheel.
Page 22 TROUBLESHOO TING GUIDE CAUTION Practice safety at all times. Engine must be turned off and allowed to cool, and spark plug wire must be disconnected before attempting any maintenance or repair .
Page 23 PROBLEM REMED Y/ACTION Belts squeal in neutral and/or reverse Belts squeal in forward operation Excessive heat build up in transmission/tine area during tilling 1 .
Page 24 Specifications TECHNICAL MANU AL A V AILABILITY Additional copies of this manual, as well as a fully illustrated P ar ts Manuals f or your unit are a vailab le. The P ar ts Manuals show all of the assemb lies and individual par ts as exploded vie ws which show the relationship of the par ts and how they go together .
An important point after buying a device Simplicity 1693207 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity 1693207 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity 1693207 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity 1693207 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity 1693207 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity 1693207, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity 1693207.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity 1693207. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity 1693207 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
