Instruction/ maintenance manual of the product 1692975 Simplicity
Go to page of 32
O PERATOR ’ S M ANUAL S PECIAL E DI T ION R EGENT “TEAM” T RACTORS Vikings Regent Tractor Badgers Regent Tractor Mfg. No. 1692957 Mfg. No. 1692967 Steelers Regent Tractor Hawkeyes Regent Tractor Mfg. No. 1692959 Mfg. No. 1692969 Panthers Regent Tractor Wolverines Regent Tractor Mfg.
Trim Installation Face Mask installation: 1. Position the face mask onto the unit with the hook in the middle grille slot, and line up with the holes on the outside of the side panels (note that the front of the face mask must be in the “V” position for proper fit.
Decal 81 Paint Information Tractor Description Mfg. No. Vikings Regent Tractor 1692957 Steelers Regent Tractor 1692959 Panthers Regent Tractor 1692961 Chiefs Regent Tractor 1692963 Colts Regent Tracto.
FormNo. FIB". 3/w 0 Copylight ,996 simplici~ Man"f?.ti"ring, Inc. AU Rights msened. Printed I" USA. TP LOO-20L3-03-RG-S (SM).
Table Of Contents TRACTOR & MOWER IDENTIFICATION.. .................. .2 SAFETY RULES ............................................................ 3 DECALS.. ...................................................................... .5 FEATURES & CONTROLS .
Tractor & Mower Identification IDENTIFICATION NUMBERS Record your model name/number, tractor and mower deck manufacturer numbers and engine serial number in the space provided for easy reference. Tractor M/N (Manufactureh Number) SIN (Serial Number) l The Tractor I.
Safety Rules A Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mow- ina deck is caDable of amoutatina hands and feet and throwina obiects.
Safety Rules CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that chil- dren will remain where you last saw them. l Keep children out of the mowing area and under the watchful care of another responsible adult.
Safety Decals GENERAL This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.
Features & Controls CONTROLS - HYDRO MODEL 4. Steering Wheel 3. Engine Throttle Control :. Parking Brake Knob I. Ignition Key/Switch 3. Headlight Switch r. PTO (Electric Clutch) Switch 3. Mower Height Adjustment Lever i. Brake Pedal I. Forward Direction Pedal I.
Operation GENERAL SAFETY INTERLOCK SYSTEM Before first time operation, drive in an open area without mowing, to become accustomed to the unit. Be sure to Your tractor is equipped with a seat switch safety sys- read all information in the Safety and Operation sections tern.
Operation II I. I / - Figure 4. Mower Deck - Right Side A. Clip C. Height Adjustment Lever B. Pin 84 Clip Figure 5. Mower Deck - Left Side A. Rod 6. Pin & Clip C. Lever MOWER INSTALLATION & REMOVAL A WARNING Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower.
Operation CHECKS BEFORE STARTING 1. Make sure you have proper wheel or counterweights installed if required. See Slope Operation in the Safety Rules section. Make sure any slopes are with- in required limits. 2. Check that crankcase is filled to full mark on dipstick.
Operation 4. On hydro model, release the parking brake by depressing the brake pedal (A, figure Et), then press down on either pedal (I or J, figure 2) for the desired direction and speed of travel. On gear model, fully depress clutch/brake pedal (A, figure 8) to release the parking brake and disengage the clutch.
GENERAL For the first use of the mower, choose a smooth level area. Cut long straight strips overlapping slightly. The size and type of area to be mowed determines the best mowing pattern to use. Obstructions such as trees, fences and buildings must also be considered.
Mowing Patterns & lips l Change the mowing pattern each time. l If mulching baffles are removed, the original deflector must be in operating position for safe side-discharge mowing.
Normal Care SCHEDULE The following schedule should be followed for normal care of your tractor and mower. You will need to keep a record of your operating time. Determining operating time is easily accomplished by multiplying the time it takes to do one job by the number of times you’ve done the job, or you can install the optional hour meter.
NormalCare CHECKING TIRE PRESSURE Front tire pressure should be 12 - 15 psi (82 - 103 kPa). Rear tire pressure should be 10 - 12 psi (56 - 82 kPa). CHECKING FUEL FILTER The fuel filter is located in fuel line between fuel tank and carburetor. If filter is dirty or clogged, replace as follows.
Normal Care TRANSAXLE - HYDRO MODELS The hydro transaxle is a sealed unit. The transaxle is filled with oil and does not require any further lubrication unless a service overhaul is performed BATTERY MAINTENANCE Checking the Battery Fluid 1. Raise the seat by tilting it forward to gain access to the battery.
NormalCare SERVICING THE MOWER BLADES A WARNING For your personal safety, do not handle the sharp mower blades with bare hands. Careless or improper handling of blades may result in serious injury. For your personal safety, blade mounting cap- screws must each be installed with a hex washer and spring washer, then securely tightened.
Storage A WARNING Never store the tractor, with gasoline in engine or fuel tank, in a heated shelter or in enclosed, poorly ventilated enclosures. Gasoline fumes may reach an open flame, spark or pilot light (such as a furnace, water heater, clothes dryer, etc.
GENERAL This section of the manual provides troubleshooting and repair instructions for the more common and easily cor- rected problems. For other problems, it is recommended that you contact your dealer. A WARNING To avoid serious injury, perform maintenance on the tractor or mower only when the engine is stopped and the parking brake engaged.
Tractor will not move with transmission in forward or reverse position. 1. Brake is not fully released. See Brake Adjustments. 2. Transmission release lever (hydro models) not fully in drive position. See Pushing The Tractor By Hand. TROUBLESHOOTING THE MOWER Mower cut is uneven.
Troubleshooting & Repair 6. Charae the batten/ until fullv charoed (i.e. until the 6. Connect the second cable negative (-) to other post specific gravity ofihe electrolyte is 1.
Troubleshooting & Repair THIS HOOK-UP FOR NEGATIVE GROUND VEHICLES TO TO MAKE CERTAIN VEHICLES DO NOT TOUCH Figure 17. Battery Jump Starting Diagram Adjustments ‘igure 18. Seat Adjustment A. Seat Adjustment Lever s L I F b /. Nut B. Spring BRAKE ADJUSTMENT 1.
Adjustments View is from right side of tractor with rear wheel removed. Figure 20. Neutral Adjustment - Hydro Model A. Nut C. Cam Slot B. Neutral Adjustment Rod D. Stop Pin NEUTRAL ADJUSTMENT - HYDRO If the tractor creeps forward or backward with the engine running and both travel pedals released, perform the fol- lowing adjustment: 1.
Adjustments when the front pedal edge is i/4” above the frame (pedal fully depressed). If it is not, loosen nut (A, figure 21), read- just pedal as necessary, then retighten nut.
Adjustments Measurement should be equal or within l/g” higher at front tips Figure 27. Front-to-Back Adjustment Nut A. Outside Nut C. Adjustment Nut B.
Belt Replacement Figure 29. Drive Belt Routing - Hydro Models A. Engine Pulley C. Idler Pulley B. Transmission Pulley Figure 28. PTO (Electric Clutch) Assembly A. PTO C. Washer B. Sleeve D. Capscrew A CAUTION To avoid damaging belts, do not pry belts over pulleys.
Specifications ENGINE 14 HP Briggs & Stratton Make: Model &Type: Horsepcwer: Cylinder: Bore & Stroke: Displacement: Construction: Electrical: Governor: Oil Capacity: Ignition: Charging: Air Cleaner: Fuel Tank: Muffler Starter: Briggs & Stratton - 4 cycle air cooled See engine I.
Parts & Accessories Replacement Parts Tractor Drive Belt-Hydro Models Tractor Drive Belt-Gear Models Drive Belt - Mower Ignition Key Headlight Bulb Mower Blade (22-l/4”) Mower Blade (16-l/8”) .
INTERNATIONAL SYMBOLS 28.
An important point after buying a device Simplicity 1692975 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Simplicity 1692975 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Simplicity 1692975 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Simplicity 1692975 you will learn all the available features of the product, as well as information on its operation. The information that you get Simplicity 1692975 will certainly help you make a decision on the purchase.
If you already are a holder of Simplicity 1692975, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Simplicity 1692975.
However, one of the most important roles played by the user manual is to help in solving problems with Simplicity 1692975. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Simplicity 1692975 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
