Instruction/ maintenance manual of the product JU-91RW12-S4 Siig
Go to page of 12
1 Introducing the Reader/Writer+Floppy The Hi-Speed USB 9-in-1 Reader/Writer+Floppy easily adds front-accessible multi-format memory card reader/ writer and floppy drive.
2 System Requirements • Pentium or equivalent PC with an internal USB port (USB 2.0 recommended) and internal floppy drive controller • One available 3.5" or 5.25" drive bay • CD-ROM drive (for driver installation) • Windows 98SE/ME/2000 SP3 or later/XP/Server 2003/Vista Package Contents • Hi-Speed USB 9-in-1 R/W+FDD • 5.
3 Figure 2. Rear Panel 5.25" Mounting Rack Assembly Important : Use the Mounting Rack Assembly only when installing the hub into a 5.25" drive bay. Depending on the model purchased, the color of your product may vary from what is shown. Floppy drive connector Floppy drive power connector Figure 3.
4 4-Pin USB Connector Figure 5. USB Pin-out Header Table Note : See Figure 4 , above, for proper orientation of the 4-pin USB Connector . +5VDC (Pin 1) Figure 4. 4-Pin USB Connector Important : The 4-Pin USB Connector is designed to plug into the 4 or 5-pin row of a USB pin-out header.
5 USB Adapter This USB adapter is only needed if you plan to connect the Reader/Writer+Floppy to a type-A USB port instead of a USB pin-out header. Match up +5VDC on the Reader/Writer+Floppy's 4-pin USB Connector to +5VDC on the USB adapter. Figure 6.
6 5. Secure the Reader/Writer+Floppy to the drive bay by using the supplied mounting screws. Note: When installing the Reader/Writer+Floppy into a 5.25" drive bay install it into the 5.25" mounting rack before mounting into the drive bay and follow the same assembly instructions.
7 8. Connect the Reader/Writer+Floppy's 4-pin USB Connector to the system's internal USB port. Refer to USB Pin-out Header , on page 4 for more information.
8 To Verify Successful Driver Installation 1. Check Device Manager to verify successful driver installation. Windows ME: Right click My Computer , click Properties , then click Device Manager . Windows 2000/XP/Server 2003: Right click My Computer , click Manage , then click Device Manager .
9 Accessing Memory Cards When the Reader/Writer+Floppy is successfully installed, two Removable Disk icons appear in My Computer . To access any one drive, double click the icon that corresponds to the memory card. The first removable disk icon corresponds to CF and Microdrive memory media.
10 Blank Page.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Hi-Speed USB 9-in-1 R/W + FDD is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.
An important point after buying a device Siig JU-91RW12-S4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig JU-91RW12-S4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig JU-91RW12-S4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig JU-91RW12-S4 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig JU-91RW12-S4 will certainly help you make a decision on the purchase.
If you already are a holder of Siig JU-91RW12-S4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig JU-91RW12-S4.
However, one of the most important roles played by the user manual is to help in solving problems with Siig JU-91RW12-S4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig JU-91RW12-S4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
