Instruction/ maintenance manual of the product CE-CV0011-S1 Siig
Go to page of 8
1 Digital to Analog Audio Converter Quick Installation Guide 04-0750A Introduction The Digital to Analog Audio Converter allows you to convert digital audio to analog L/R stereo. Key Features and Benefits • Converts Coaxial or Toslink digital audio to analog L/R stereo output • Supports audio sampling rate at 32, 44.
2 Layout Figure 1: Input Figure 2: Output Coaxial Toslink Power LED RCA (R/L) Power Jack Package Contents • Digital to Analog Audio Converter • Power adapter • Quick installation guide.
3 Hardware Installation 1 . Power off all devices you plan to connect to this converter. 2 . Connect your audio source to the converter’s Input connector using a Toslink or Coaxial cable (not included). 3 . Connect your A/V receiver or amplifier to the converter’s Output connectors using a R/L cable (not included).
4 Blank page.
5 Blank page.
6 Blank page.
7 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
PRODUCT NAME Digital to Analog Audio Converter FCC RULES: TESTED TO COMPL Y WITH FCC P AR T 15, CLASS B OPERA TING ENVIRONMENT : FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules.
An important point after buying a device Siig CE-CV0011-S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siig CE-CV0011-S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siig CE-CV0011-S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siig CE-CV0011-S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Siig CE-CV0011-S1 will certainly help you make a decision on the purchase.
If you already are a holder of Siig CE-CV0011-S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siig CE-CV0011-S1.
However, one of the most important roles played by the user manual is to help in solving problems with Siig CE-CV0011-S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siig CE-CV0011-S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
