Instruction/ maintenance manual of the product 5090S SIIG
Go to page of 12
1 2.5" USB 2.0 to SATA Enclosure Quick Installation Guide 04-0651A Introducing the USB 2.0 2.5" Enclosure The 2.5" USB 2.0 to SATA Enclosure is designed to support USB equipped computers. This enclosure provides large capacity mobile storage using 2.
2 System Requirements • Desktop or notebook PC with an available USB 2.0/3.0 port • Windows ® 7 (32-/64-bit) ) / Vista (32-/64- bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 SP4 Package Contents • 2.
3 Figure 2: USB cable Hardware Installation The following section guides you through the installation of your drive kit. Installing a 2.5" Hard Drive 1 . Remove the 2 screws in each side, see Figure 3 . Slide the top cover out of the case, then slide the lower cover out of the case, see Figure 4 .
4 2 . Take off the PCB and connect it to the hard disk drive, see Figure 5 and Figure 6 . Figure 5 Figure 6.
5 3 . Put the installed PCB with hard disk drive into the hard disk drive tray, see Figure 7 . Figure 7 4. Hold onto the hard disk drive and turn the hard disk drive tray over.
6 5 . Slide the lower cover back into the case and secure it with the two mounting screws, then slide the upper cover back into the case and secure it with the two mounting screws. 6 . Use the included USB 2.0 data cable to plug the 2.5" USB 2.0 to SATA Enclosure into the computer.
7 Using the 2.5" USB 2.0 to SATA Enclosure An additional drive icon will appear in My Computer or Computer when the enclosure is plugged into a USB port. The drive acts just like a conventional hard drive in your system. Disconnecting From The Computer Before unplugging the 2.
8 4 . You can now unplug or turn off the 2.5" USB 2.0 to SATA Enclosure. Windows Vista / Server 2008 1 . Verify that the LED is not flashing before proceeding. 2 . Click the Safely Remove Hardware icon located in the system tray by the system clock.
9 Windows 2000 SP4 1 . Verify that the HDD LED is ON or not blinking. 2 . Double click the Unplug or Eject Hardware icon located in the system tray by the system clock. 3 . Highlight USB Mass Storage Device , click Stop , OK , OK , then click Close . 4 .
10 Blank Page.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/ O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals.
An important point after buying a device SIIG 5090S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 5090S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 5090S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 5090S you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 5090S will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 5090S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 5090S.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 5090S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 5090S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
