Instruction/ maintenance manual of the product 04-0680B SIIG
Go to page of 12
1 Articulating Monitor Desk Mount - 13" to 27" Installation Instructions 04-0680B.
2 Unpacking • Carefully remove contents and lay out on cardboard or other protective surface • Check package contents against the parts list to ensure that all components were received undamaged.
3 Parts List a - (1x) 35mm Tube Support b - (1x) C Clamp c - (1x) Vesa Plate with Arm d - (4x) M4x12 Bolt e - (4x) M4x30 Bolt f - (8x) M4 Washer (4x) M4 Spacer h - (2x) Wire Clip i - (2x) M10x15 Bolt .
4 1 . Install the C Clamp (b) to the 35mm Tube Support (a) according to the thickness of the desktop. The thickness can be changed in three positions. Connect it using 2 M10x15 Bolts (i) and tighten using the Allen Key (j). Tighten the C Clamp to the desktop using the 2 eye bolts.
5 2 . Install the Vesa Plate with Arm (c) to the tube support, make sure the wire clips are on the bottom. Tighten the clamp bolt using the Allen Key (j).
6 3 . Mount the monitor to the Vesa plate. 3-1. For flat back monitors use M4x12 Bolt (d) and M4 Washer (f). Flat Back Monitor.
7 3-2. For curved back monitors use M4 Spacer (g), M4x30 Bolt (e) and M4 Washer (f). Curved Back Monitor.
8 4 . Adjust the height and install the Wire Clips (h). Adjust Height Install Wire Clips.
9 5 . Check the tightness, arrange the cables through the wire clips, and make any final adjustments. Check Tightness Arrange Cables.
10 Blank Page.
11 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/ O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals.
An important point after buying a device SIIG 04-0680B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0680B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0680B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0680B you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0680B will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0680B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0680B.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0680B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0680B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
