Instruction/ maintenance manual of the product 04-0322B SIIG
Go to page of 12
1 Serial ATA 4-Channel PCI Quick Installation Guide 04-0322B Introducing the Serial ATA 4-Channel PCI The Serial ATA 4-Channel PCI is an ultra high-speed four channel Serial ATA controller for use in Pentium-class computers. It achieves burst data transfer rates up to 150MB/s (1.
2 Package Contents • (1) Serial ATA 4-Channel PCI board • (1) Driver CD • (2) Serial ATA cable • (1) Dual connector Serial ATA power cable • This quick installation guide Board Layout Serial ATA Connectors CN4 CN3 CN2 CN1 Hard Disk LED Pins Figure 1.
3 • Remove your computer’s cover and install the card in an available PCI slot. • Push the board down firmly, but gently, until it is well seated. Install a slot bracket holding screw to secure the card. • Now go to Device Connection to connect your Serial ATA hard disk drive(s).
4 Note : If you like to monitor disk activity of the Serial ATA hard drives, you may at this time connect the hard disk LED of the system case to the Hard Disk LED Pins on the Serial ATA controller, see figure 1 , on page 2 for the location of the pins.
5 5. Insert the driver CD and click Next . 6. Select Search for a better driver ... and click Next . 7. Check CD-ROM drive, uncheck the other boxes, then click Next . Click Next again , then Finish . 8. Click Yes to restart Windows to complete the driver installation.
6 7. Click Finish , then click Yes to restart Windows to complete the driver installation. For Existing Windows ME Installation 1. Install the board and boot up Windows ME. 2. At the Add New Hardware Wizard , insert the driver CD. 3 . Select Automatic search for a better driver (Recommended) , then click Next .
7 2. At the Windows NT Setup screen, press F6 to specify and add the driver. 3. Press S , select Other , then press Enter . 4. Insert the driver diskette and press Enter . 5. Select Silicon Image SiI 3114 ... Controller for Windows NT 4.0 and 2000 , and press Enter .
8 Windows 2000 Driver Installation A new installation of Windows 2000 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below.
9 Windows XP/Server 2003 Driver Installation A new installation of Windows XP/Server 2003 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below.
10 Note : If a warning message pops up, click Continue Anyway , then click Finish . Our driver has been thoroughly tested in Windows for stability. 4. Remove the driver CD and restart Windows to complete the driver installation. Verify Proper Installation for Windows 2000/XP/ Server 2003 1.
11 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
Serial ATA 4-Channel PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
An important point after buying a device SIIG 04-0322B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0322B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0322B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0322B you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0322B will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0322B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0322B.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0322B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0322B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
