Instruction/ maintenance manual of the product 04-0288E SIIG
Go to page of 12
1 USB 2.0+1394 DV Kit Quick Installation Guide 04-0288E Introducing the USB 2.0+1394 DV Kit The USB 2.0+1394 DV Kit is a complete DV editing kit -- a combo card with USB 2.0 and FireWire (1394a) interfaces, deluxe DV editing software (full DV, AVI, QuickTime, Windows Media, RealNetworks, and MPEG2 support) and a 1394 6-pin/4-pin DV cable.
2 • IEEE 1394-1995, P1394a (rev. 1.1) and OHCI Interface Specification 1.0 compliant • Supports serial bus data transfer rates of 100, 200 and 400 Mbps System Requirements • Pentium or equivalen.
3 Board Layout Figure 1. Board Layout Power Connector (optional) USB 2.0 Port USB 2.0 Ports 1394 Ports 1394 Port Note: This power connector (same as the one used with your floppy disk drive) is designed to provide additional power to the board when needed.
4 Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system.
5 3. Click Start , then Run . Type in X:setup.exe and click OK . (Change X: to match your CD-ROM drive letter) 4. Click Next , Next , at the Warning box click OK , then click Finish to restart. 5. When the VIA ...Universal Host Controller is detected, click Next .
6 3. Click Start , then Run . Type X:setup.exe and click OK . (Change X: to match your CD-ROM drive letter). 4. Follow the on-screen instructions to install the driver. When prompted click Finish to restart. 5 . At the Add New Hardware Wizard , choose Automatic search for a better .
7 8. When Windows restarts, the drivers will install automatically. Windows XP/Server 2003 Windows XP Service Pack 1 (SP 1) or later is required for this installation. Windows XP Service Pack 1 or later will automatically detect and install the correct drivers for this board.
8 b) Under the 1394 Bus Controller or IEEE 1394 Bus host controllers: - VIA OHCI Compliant IEEE 1394 Host Controller Windows 2000 (with SP4 or later): a) Under the Universal Serial Bus Controllers: - VIA ... Universal Host Controller - VIA ... Universal Host Controller - VIA USB Enhanced Host Controller - USB 2.
9 Ulead VideoStudio Software Installation The USB 2.0 + 1394 DV Kit includes Ulead ® VideoStudio TM digital video editing software for producing home videos complete with attractive titles, transitions and sounds. Before installing VideoStudio, make sure your adapter and DV camcorder are properly installed and configured.
10 To Verify Successful DV Camcorder Setup 1. Check Device Manager to verify successful driver installation. Windows 98SE/ME: From the main desktop, right click My Computer , then click Properties . Click Device Manager tab. Windows 2000/XP/2003: Right click My Computer , click Manage , then click Device Manager .
11 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away.
USB 2.0+FireWire DV Kit is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.
An important point after buying a device SIIG 04-0288E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SIIG 04-0288E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SIIG 04-0288E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SIIG 04-0288E you will learn all the available features of the product, as well as information on its operation. The information that you get SIIG 04-0288E will certainly help you make a decision on the purchase.
If you already are a holder of SIIG 04-0288E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SIIG 04-0288E.
However, one of the most important roles played by the user manual is to help in solving problems with SIIG 04-0288E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SIIG 04-0288E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
