Instruction/ maintenance manual of the product SIG100-97 Signature
Go to page of 20
SIG100-97 Automatic W ashing Machine Please read this manual carefully before use. Please retain it attentively for future reference. Please check if the power receptacle is earthed reliably before usage to guarantee your safety. The manufacturer is not responsible for any risks occurred owing to disobey these stipulations.
Contents Names of parts 1 Safety precautions 2 Installation and adjustment 4 Preparation before washing 6 Put in the laundries 7 Usage of the detergent 7 Usage of the operation buttons 8 Close the top.
Names of the parts 1 Softener injection inlet Bleach injection inlet Adjustable feet (4) Cabinet Control panel Control panel seat Inner tub Top lid Power line Cold water inlet valve W ater absorption .
Safety precautions 2 Do not put the machine at damp place like the bath room. Never wash it with water.No t put wet laundries on the control panel. Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.
Safety precautions 3 Do not decompose, repair or alter the machine by yourself. Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
Installa tion and adjustment 4 Adjust the installation position The largest allowed slope of the base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to confirm if it is horizontal.
5 Install the wa ter inlet hose 2. Connect the hot and cold water inlet hoses to the hot and cold water faucet. 3. Connect the other ends to their respective cold and hot water inlet valve located at the rear of the washer Hot water needs to be at a temperature of at least 120 F- 140 F .
6 Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline.
7 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spined in one time. Lau- ndries quantity in one washing cycle shall be lower than the rated capacity.
8 Fabric conditioner Explanation of Buttons Indicator mode and meaning The indicator is off, indicating that the program or mode is not selected The indicator is on, indicating the program or mode selected and about to run Heavy Duty For setting, changing water level and manually replenishing water.
9 Process Delicate Casual Soak 2ND Rinse Was h Rinse Spin Start Pause Power On/Off Wash/Rinse Hand Wash Temp Hot/Cold Warm/Cold Cold/Cold Cycle Signal Louder Softer Off After switch on the power, push it once to start the washing machine In operating, push the button to pause the operating.
10 Buttons initial status for Normal program Normal/Fast Normal/Slow Delicate/Fast Delicate/Slow Speed Wash/Spin Load Size Soil level Stain Wash Heavy Normal Light Normal Heavy Duty Whites Delay Start.
11 3. Press the button of Process to select suitable processes. Page 9 2. Press the button of cycles to select a suitable full-automatic program. After switching on, the Normal program will be the default. If other full-automatic program is desired, you can press the button of cycles to get the corresponding indicator on.
12 Spin shall begin after some time even there is no water in the tub Do not use soak process for woolen articles. Clothes prone to fade and other clothes shall be separately washed. Note 4. Press the button of Load Size to select a suitable water level.
13 8. Press the button of Cycle Signal , which will accordingly remind you of the cycle completion. Confirming a reserved program Page 9 Cycle Signal After the power is switched on, the washing machine will automatically set at Softer . The user himself could also set three warning volumes Louder, Softer or Off for the completion of a cycle.
14 Finish Washing The power will be switched off automatically after the finishing of the washing. Close the top lid If you open the top lid, the machine will stop working except for water filling and.
15 After washing Agitator Press Lint filter Lint Screen Figure Figure 2 Figure 3 Pull up out After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.
16 Trouble shooting answer to question Phenomena (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes.
17 Packing list Name User's manual Quantity 1 1 1 1 2 Automatic washing machine Warranty Card Drain hose Water inlet hose 1 Drain hose hook Drain hose clamp 1.
Specification Model SIG100-97 Rated voltage frequency 220-240V~ 50Hz Rated washing / spinning capacity 8.5kg (weight of standard dry cloth) Water level/Water quantity (about) Max water consumption Injection pressure 0.
An important point after buying a device Signature SIG100-97 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Signature SIG100-97 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Signature SIG100-97 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Signature SIG100-97 you will learn all the available features of the product, as well as information on its operation. The information that you get Signature SIG100-97 will certainly help you make a decision on the purchase.
If you already are a holder of Signature SIG100-97, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Signature SIG100-97.
However, one of the most important roles played by the user manual is to help in solving problems with Signature SIG100-97. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Signature SIG100-97 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
