Instruction/ maintenance manual of the product AS-H60Y Sigma
Go to page of 20
AS-H40Y - 12kW AS-H50Y - 15kW AS-H60Y - 18kW AL TO Hea t Pump inst alla tion manu al F1-F7.
1 CUSTOMER NAME........................................................................ POOL DEALER.............................................................................. DA TE INST ALLED.........................................................
HEA T PUMP- AS-H40Y 12kW 2.
3 HEA T PUMP- AS-H50Y (15kW) & AS-H60 (18kW).
INST ALLA TION AND SITING Prior to installing your heat pump:- All heat pumps are factory assembled and tested prior to delivery . Please check for any external damage especially to the evaporator fins, please diagram below .
5 PLUMBING Alto heat pumps are supplied with 1.5" BSP parallel threads, male. We strongly recommend a 1.5" female socket union is applied to inlet/outlets for future draining and servicing of the appliance. Alto heat pumps must be inst alled in the return line after the filter .
N L ON OFF CONT A CTOR 12 HEA TER Red Black OUTLET FLOW SWITCH OPERA TION WA TER FLOW FROM PUMP SOCKET UNION TEE INLET OFF ON Alternat ive w irin g route SOCKET UNION RETURN W A TE R FLOW TO POOL 1. Insert reducing bushes (provided) into 1.5” T ee using suitable adhesive.
7 Ball Va l v e BACK WASH FILTER FIL TER Pool Position for option al Erosion Fe eder Non-Retur n V alve Back-Up Heater if required Condensat e W ater to waste PUMP Female/ Threade d Socket Union Drw .1 Recommended plumbing layout for a st andard heat pump installation.
Ball Va l v e BACKW ASH FIL TER FIL TER Pool Non-R etu rn Valve Back-Up Heater if required Condensate W ater to waste PUMP Female/ Threaded Socket Union to be applied on all inlet/outlets Position for optional Erosion Feeder Ball Va l v e Ball Va l v e Condensate W ater to waste required or Erro sion Feede r if instal led Drw .
9 ELECTRICAL CONNECTION & CIRCUIT DIAGRAM IMPORT ANT . It is recommended that all electrical supplies and connections are carried out by a qualified electrician , in accordance with I.E.E. standards, latest issue, or local codes of practice as applicable.
1. When electric supply is connected the ‘Run’ power light will be on and the display panel will display the current water temperature. ie.10 H = 10°C. 2. On/OFF button to turn heater on and off. 3. The ‘set’ button is used to set the F1-6 functions ie.
11 When the ON/OFF buttons is pressed for the first time, the display panel will display the current water temperature and the desired pool temperature. eg. the display may read 10 40 ----- 10 is the current water temperature 10°C and 40 is the desired water temperature 40°C.
When the SET button is pressed for the fourth time, the display p anel will display:- F4 : Operation Mode. F4 C : Cooling Mode. F4 H : Heating Mode When the SET button is pressed for the fif th time, the display panel will display:- F5 : The defrosting temperature of the evaporator pipe .
13 RED area RED area area RED area RED area area RED area RED area area After the water heater has been running for more than 24 hrs, it should be running at full capacity .
E1 : the water temperature sensor is not working correctly . E2 : the tube sensor is not working correctly . Please contact your dealer . E3 : Pool filtration is running but water flow is not sensed. ‘Flow Switch’ may not be working properly or there is a lack of water flow .
15 AUT O REST ART AND DEFROSTING FUNCTION AUTO REST ART FUNCTION The Alto water heat pump has an auto rest art function. When the power supply is switched off accidentally , it will automatically save the operation mode. When the power supply is restored, the unit will automatically restart af ter five minutes and operate in the same working mode.
WINTERISING / ST ART -UP procedure - ALL MODELS W A TER CHEMISTR Y The following water quality must be maintained at all times to prevent premature corrosion. It is recommended that your water balance is checked and balanced by a pool professional. Y our warranty does not cover for damaged caused by poor water chemistry and neglect.
17 AL T O W ARRANTY POLICY This voluntary policy is supplement al to and in no way affects any st atutory rights which the customer may have. 1 W arranties 1.1 Paramount Pools warrants the Alto Heat Pump for a period of one (1) year from the date installed for both part s and labour .
HEA T PUMP SER VICE An Alto heat pump should give you many years trouble free service. However , to obtain the maximum efficiency from your heater Alto recommend that your heater is checked and serviced every 12 months. Service & extended warranty packages are available from a UK Service Agent (see contact det ail below).
Model No. AS-H40Y AS-H50Y AS-H60Y 12kW 15kW 18kW Heating Capacity (Btu) 40000 50000 60000 Cooling Capacity (Btu) 35000 42000 55000 Rated Input (W) Heating 2540 3185 3790 Cooling 2465 3020 3900 PTC Power (W) -------- -------- -------- COP for Heating (w/w) 4.
An important point after buying a device Sigma AS-H60Y (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sigma AS-H60Y yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sigma AS-H60Y - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sigma AS-H60Y you will learn all the available features of the product, as well as information on its operation. The information that you get Sigma AS-H60Y will certainly help you make a decision on the purchase.
If you already are a holder of Sigma AS-H60Y, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sigma AS-H60Y.
However, one of the most important roles played by the user manual is to help in solving problems with Sigma AS-H60Y. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sigma AS-H60Y along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
