Instruction/ maintenance manual of the product SF 25T252 EU Siemens
Go to page of 32
en Instructions for use.
.
en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling in the Salt 8 . . . . . . . . . . . . . . . Adding rinse aid 9 . . . . . . . . . . . . . . . Not suitable for the dishwasher 10 .
en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly: D The corrugated cardboard consists mainly of waste paper .
en 5 In daily use W arning Knives and other utensils with sharp points must be placed in the baskets either flat or with the points downwards. Use the dishwasher only in the household and only for its designed purpose, i.e. for washing domestic dishes.
en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text.
en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.
en 8 Filling in the Salt Open the screw-type cap of the compartment 24 . W arning Before switching on the appliance for the first time, pour approx. 1 litre of water into the salt dispenser . Then refill with salt (not cooking salt) until the salt container is full (max.
en 9 Adding rinse aid The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Open the cover on the rinse-aid dispenser 29 . T o do this, press the mark (1 ) on the cover and simultaneously lift the cover on the control plate (2 ).
en 10 Not suitable for the dishwasher The following should not be cleaned in the dishwasher: W ooden cutlery and utensils – these will leach out and become unsightly; even the utilised stickers are not suitable for the temperatures which occur . Sensitive ornamental glasses, craft utensil and vases, special antique or irretrievable utensils.
en 1 1 Arranging crockery , glasses, etc. in the dishwasher Loading the dishwasher Scrape of f any large amounts of left-over food. It is not necessary to rinse the dishes under running water . Place objects in the dishwasher in such a way that D items such as cups, glasses, pots/pans, etc.
en 12 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory).
en 13 T op basket with upper and lower roller pairs Pull out the top basket. Remove the top basket and re-attach it to the upper or lower rollers. T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket.
en 14 Baking sheet spray head * * some models Y ou can clean large baking sheets or grilles with the baking sheet spray head. T o do this, remove the top basket and insert the spray head as illustrated in the diagram. T o ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max.
en 15 Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add. The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line.
en 16 auto 3in1 The use of so-called combined detergent products may make the use of rinse aid and/or salt unnecessary . There are currently several types of combined detergent products available. 3in1: They contain detergent, rinse aid and salt function.
en 17 Switching the salt refill indicator / water softening system off and on Close the door . Hold down the programme button B and switch on the main switch 1 , then release the buttons. The illuminated button B and the factory-set value on the digital display flash.
en 18 Programme overview This overview lists the max. possible number of programmes. The programmes supplied with your appliance are indicated on the fascia.
en 19 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suf fice. Programme data The programme specifications can be found in the summary of instructions.
en 20 Switching the dishwasher OFF Several minutes after the programme has ended: Set the main switch 1 to OFF . T urn the water tap of f. (Does not apply when Aqua-Stop unit has been fitted) Remove dishes, etc. when they have cooled down. Interrupting the programme Set main switch 1 to OFF .
en 21 Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Therefore you should occasionally have a careful look inside your dishwasher . Overall condition of the machine Check spray arm for grease and limescale deposits.
en 22 Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary , pull the lower arm 23 upwards and lift it of f.
en 23 Fault finding Resolving minor problems yourself Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer . Not only does this save costs, but it also means that the appliance is available for use again that much sooner .
en 24 W ater remains inside appliance after programme has ended Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. W ait for the programme to end (numerical display will indicate 0). Perform “Reset” function.
en 25 Dishes, cutlery , etc. have not been dried Selected programme did not include drying function. Amount of rinse-aid was set too low . Items were removed from dishwasher too soon. Glasses have a dull appearance Amount of rinse-aid was set too low .
en 26 Information Notes on comparison tests Y ou will find details of the conditions for the comparison tests on the additional ”Notes on comparison tests” sheet.
en 27 Fresh water connection Using the enclosed parts, connect the fresh water connection to the tap according to the installation instructions. Ensure that the fresh water connection is not kinked, crushed or twisted. When replacing the appliance, always connect a new water supply hose to the water supply .
en 28 Protection from freezing temperatures If the appliance is installed in a location where there is a risk of freezing temperatures (e.g. in a holiday home), all water must be completely drained out of the interior (see “T ransporting the dishwasher”).
en 29 Disposal of the packaging Please dispose of the packaging material in an environmentally friendly manner . Keep children away from shipping carton and packaging components. Danger of suf focation from folding cartons and plastic film. D Corrugated cardboard consists mainly of wastepaper .
en 30 en Subjekt to modification.
.
AQUA-ST OP guarantee (does not apply to appliances without Aqua-Stop) In addition to warranty claims against the seller based on the purchase contract and in addition to our appliance warranty we will pay damages under the following conditions: 1.
An important point after buying a device Siemens SF 25T252 EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens SF 25T252 EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens SF 25T252 EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens SF 25T252 EU you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens SF 25T252 EU will certainly help you make a decision on the purchase.
If you already are a holder of Siemens SF 25T252 EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens SF 25T252 EU.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens SF 25T252 EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens SF 25T252 EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center