Instruction/ maintenance manual of the product SE 65T372 Siemens
Go to page of 33
.
.
en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling in the Salt 8 . . . . . . . . . . . . . . . Adding rinse aid 9 . . . . . . . . . . . . . . . Not suitable for the dishwasher 10 .
en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly . Installation Install and connect the appliance according to the installation and assembly instructions.
en 5 Children in the household Do not let infants play or operate the dishwasher . Keep cleaning and rinsing agents out of the reach of infants. These may cause chemical burns in the mouth, throat and eyes or asphyxiation. Keep infants away from the open dishwasher .
en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text.
en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.
en 8 Filling in the Salt Open the screw-type cap of the compartment 24 . W arning Before switching on the appliance for the first time, pour approx. 1 litre of water into the salt dispenser . Then refill with salt (not cooking salt) until the salt container is full (max.
en 9 Adding rinse aid The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Open the cover on the rinse-aid dispenser 29 . T o do this, press the mark (1 ) on the cover and simultaneously lift the cover on the control plate (2 ).
en 10 Not suitable for the dishwasher The following should not be cleaned in the dishwasher: W ooden cutlery and utensils – these will leach out and become unsightly; even the utilised stickers are not suitable for the temperatures which occur . Sensitive ornamental glasses, craft utensil and vases, special antique or irretrievable utensils.
en 1 1 Arranging crockery , glasses, etc. in the dishwasher Loading the dishwasher Scrape of f any large amounts of left-over food. It is not necessary to rinse the dishes under running water . Place objects in the dishwasher in such a way that D items such as cups, glasses, pots/pans, etc.
en 12 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory).
en 13 T op basket with upper and lower roller pairs Pull out the top basket. Remove the top basket and re-attach it to the upper or lower rollers. T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket.
en 14 Baking sheet spray head * * some models Y ou can clean large baking sheets or grilles with the baking sheet spray head. T o do this, remove the top basket and insert the spray head as illustrated in the diagram. T o ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max.
en 15 Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add. The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line.
en 16 auto 3in1 The use of so-called combined detergent products may make the use of rinse aid and/or salt unnecessary . There are currently several types of combined detergent products available. 2in1: They contain detergent and rinse aid or salt function.
en 17 Switching the salt refill indicator / water softening system off and on Hold down the programme button B and switch on the main switch 1 , then release the buttons. The illuminated button B and the factory-set value on the digital display flash.
en 18 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. Rinse if the utensils have been left several days prior to washing in the dishwasher .
en 19 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suf fice. Programme data The programme specifications can be found in the summary of instructions.
en 20 Time delay * * on applicable models Y ou can delay the start of the programme in 1-hour steps up to 19 hours. Switch on the appliance. Press the timer programming button 3 until the digital display 9 jumps to . Keep pressing the timer programming button until the required time is displayed.
en 21 Intensive drying If the “Intensive drying” function is activated, the temperature of the final rinse is increased in all programmes and you will therefore receive an improved drying result. (Note the higher temperature may not be suitable for fragile utensils.
en 22 Maintenance and care A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. Therefore you should occasionally have a careful look inside your dishwasher . Overall condition of the machine Check spray arm for grease and limescale deposits.
en 23 Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary , pull the lower arm 23 upwards and lift it of f.
en 24 Pump * * on applicable models Larger remnants of food that have not been trapped by the filters and have been left in the water can cause a blockage in the pump. The water is no longer pumped out of the dishwasher and it can be seen covering the filter .
en 25 The filter on the water supply hose is blocked. Switch of f the appliance and pull out the mains plug. T urn of f the tap. Then clean the filter which is situated at the connection of the supply hose. Finally , restore the power , turn on the tap and switch on the appliance.
en 26 ... with the dishes, cutlery , etc. Remnants of food are stuck to the dishes, cutlery , etc. Dishwasher was not loaded properly . Jets of water could not reach all parts of the dishes, etc. T oo many items in the rack. Items in the rack were touching each other .
en 27 Customer Service Please call your local service agent, if you are not able to resolve any problem yourself. The name of your nearest service agent is shown in the Customer Service address list.
en 28 Installation The dishwasher must be connected by a qualified technician to ensure correct operation. The specifications for supply , drainage and connected load must fulfil the required criteria as stated in the following paragraphs or in the installation instructions.
en 29 Removing the appliance It is essential, when removing the appliance, to observe the following sequence: First, disconnect the appliance from the power supply . Pull out the mains plug. T urn of f the water supply . Disconnect the waste water and fresh water connections.
en 30 W aste disposal Disposal Old appliances are not worthless rubbish. V aluable raw materials can be reclaimed by recycling old appliances. Pull out the mains plug of the redundant appliance.
en 31 en Subjekt to modification.
.
.
An important point after buying a device Siemens SE 65T372 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Siemens SE 65T372 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Siemens SE 65T372 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Siemens SE 65T372 you will learn all the available features of the product, as well as information on its operation. The information that you get Siemens SE 65T372 will certainly help you make a decision on the purchase.
If you already are a holder of Siemens SE 65T372, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Siemens SE 65T372.
However, one of the most important roles played by the user manual is to help in solving problems with Siemens SE 65T372. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Siemens SE 65T372 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
