Instruction/ maintenance manual of the product 250S Blade Axis
Go to page of 8
AXIS 250S Blade Rack Solution Installation Guide.
AXIS COMMUNICATIONS <Product Name> Qui ck User’s Guide 2 About This Document This document is intended as an addendum to the video server User’s Manua l. It includes instructio ns for installing the Axis Rack Mounted Video Server Sol ution on your network.
3 AXIS 250S Blade - Rack Solution Installation Guide The Axis Video Server Rack will fit up to 12 rack mounted Axis Video Servers (Blade Servers). This installation guide describes th e hardware installation of the Axis Rack Mounted Video Server Solution.
4 AXIS 250S Blade - Rack Soluti on Installation Guide AXIS 250S Blade Video Server Read the following information to familiarize yourself with the AXIS 250S Blade video server making particular note o.
5 AXIS 250S Blade - Rack Solution Installation Guide AXIS 250S Blade Switch - for selecting 75 ohm video termination (for BNC). By default set to ON. Bus Connector - connected to the I/O terminal block connector at the back of the rack.
6 AXIS 250S Blade - Rack Soluti on Installation Guide The I/O Terminal Block Axis Blade Vi deo Servers connect to an I/ O te rminal block used for transmitting data over multi-drop communication lines.
7 AXIS 250S Blade - Rack Solution Installation Guide Connecting the video server to the rack Please read th rough the instructions belo w before beginning the installation. 1. Connect the power cable to the power connector on the rack. Make sure that the green power indicat or is lit.
8 AXIS 250S Blade - Rack Soluti on Installation Guide Technical Specifications The following specifications are applicable for the comple te Axis Rack Mounted Video Server Solution i.e. an AXIS Video Server Rack with a mounted AXIS 250S Blade Video Server.
An important point after buying a device Axis 250S Blade (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Axis 250S Blade yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Axis 250S Blade - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Axis 250S Blade you will learn all the available features of the product, as well as information on its operation. The information that you get Axis 250S Blade will certainly help you make a decision on the purchase.
If you already are a holder of Axis 250S Blade, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Axis 250S Blade.
However, one of the most important roles played by the user manual is to help in solving problems with Axis 250S Blade. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Axis 250S Blade along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
