Instruction/ maintenance manual of the product RK199S Shure
Go to page of 2
SPLIT BAR SWITCH KIT The Shure Model RK199S Split Bar Switch Kit is designed to enable users of Shure base station microphones to monitor a communications channel by disabling the receiver squelch circuit before transmitting. Once installed, the microphone T ransmit switch can be depressed only while the Monitor switch is depressed.
5. Remove the two screws securing the present switch stack and carefully move the switch stack to one side. Attach the right-angle bracket to the switch mounting plate using a 5 / 16 ” screw and the single mounting plate hole next to the switch stack screw holes.
An important point after buying a device Shure RK199S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure RK199S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure RK199S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure RK199S you will learn all the available features of the product, as well as information on its operation. The information that you get Shure RK199S will certainly help you make a decision on the purchase.
If you already are a holder of Shure RK199S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure RK199S.
However, one of the most important roles played by the user manual is to help in solving problems with Shure RK199S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure RK199S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
