Instruction/ maintenance manual of the product M267 Shure
Go to page of 5
Model M267 User Guide Shure Brothers Incorporated 222 Hartrey A venue Evanston IL 60202-3696 U.S.A. 27A8376 (QE) 1997, Shure Brothers Incorporated Printed in U.S.A. GENERAL The S hur e M ode l M 26 7 i s a m icrophon e m ixer-remot e a m- plifier s pecificall y d esigne d f o r p rofessiona l a pplications .
2 Outputs IMPEDANCE Output Designed for Use W ith Actua l (Internal) Output Clipping Level Microphone Any low imped - anc e m icrophone input 0.5 –34 d B (2 0 m V) Mix Bus 3.5 k 3.5 k –8 dBV (400 mV) Head - phones 8 - 2000 200 recommended 400 3 k ∗∗ +10 dBV (3.
3 CONTROLS AND CONNECT ORS W ARNING This apparatus must be earthed (grounded)! The M267 power supply is energized when the unit is connected to an ac source; disconnect mains (power) plug from supply when not in use.
4 Mix Bus Direct access to the mixing bus is provided through the rear-panel MIX BUS phono pin jack. This provision is made primarily to facilitate stacking or “multing” M267s to achieve additional input capacity without losing any in- puts.
5 telephone line. If a coupler is required, make certain the coupler selected and the wiring arrangement are in com - pliance with the telephone company regulations. When direct connection to a telephone line is not pos- sible, acoustic coupling to a telephone handset may be used.
An important point after buying a device Shure M267 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure M267 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure M267 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure M267 you will learn all the available features of the product, as well as information on its operation. The information that you get Shure M267 will certainly help you make a decision on the purchase.
If you already are a holder of Shure M267, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure M267.
However, one of the most important roles played by the user manual is to help in solving problems with Shure M267. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure M267 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
