Instruction/ maintenance manual of the product HTSSOSPA Shure
Go to page of 8
HTSSOSPA Power Amplifier.
HTSSOSPA SIGNAL PROCESSING STEREO POWER AMPLIFIER INTRODUCTION Congratulations! You have chosen the Shure HTSSOSPA Signal Processing Stereo Power Amplitier, specially made as an integral part of your Shure HTS Theater Reference System.
RISK OF ELECTRIC SHOCK AmA CAUTION. TO REOUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO OUALFIED SERVICE PERSONNEL The llghtnrng flash w~th arr.
emphasis in either alternate level setting can provide exceptional excitement and even greater enjoy- ment in home theater sound. These slotted control knobs are intended to require insertion of a coin to change their settings; they resist accidental changes of position.
INDICATORS @ POPER; Red light in the pushbutton Power switch illuminates to indicate power is on. @ SIGNAL: Green light illuminates when a signal is present in the channel. @ OVERLOAD: Red light illuminates to indicate limiting when the Protection Defeat switch is out, or to indicate clip- ping when the Protection Defeat switch is pushed in.
BRIDGED CONNECTION If the amplifier is used in the Bridged MtKie, to prevent the risk of electric shock the following instructions describe the only acceptable method of connection (see illustration). Voltages in the Bridged Connection ate hazardous to life.
TYPICAL SYSTEM ARRANGEMENT TYPICAL SYSTEM CONNECI'IONS.
Copyr~aht 1983. Shore BI-others Inc 27A8165 (IA) SHURE HTS The Home Theater Sound Division of Shure Brothers Inc. 222 Hartrey Avenue Evanston, l L 60202-3696 Pr~nted In U.
An important point after buying a device Shure HTSSOSPA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure HTSSOSPA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure HTSSOSPA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure HTSSOSPA you will learn all the available features of the product, as well as information on its operation. The information that you get Shure HTSSOSPA will certainly help you make a decision on the purchase.
If you already are a holder of Shure HTSSOSPA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure HTSSOSPA.
However, one of the most important roles played by the user manual is to help in solving problems with Shure HTSSOSPA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure HTSSOSPA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
