Instruction/ maintenance manual of the product SD8141 Shiro
Go to page of 20
.
Thank you for your choice of the new digital cordless phone Shiro SD8141. SD8141 is a DECT (Digital European Cordless T elephone) phone with GAP (Generic Access Profile) profile.
Index SD8141 . Accessories . T echnical data . A glance guide to the buttons on your . handset . Key and symbols description . A glance guide to the buttons on the base . Installation and set-up . AC/DC adaptor installation . Phone line connection . Battery installation .
A glance guide to the buttons on your handset. The handset INT RD SD 8141 Earpiece Listening Display See page 4. 02899832620 MEM button press to make calls to numbers stored in memory FLASH button you.
Key and symbols description Handset: : Hook switch key; : Intercom key between handsets; : phone book access key and flash key ; : mute key , delete key and Menu exit k ey ; : Menu access key , confir.
Incoming Call Light Charging Light Page Button New Call / In Use The headset jack The headset jack let you use the handset**(optional). Start by plugging it into the bottom of the handset as shown. ** Y ou can purchase the handset from our office or purchase a mobile phone handset(motoroXX type).
DC 9V Installation and Setting Up 1 Choose a suitable site for the base unit. M sure it is not near to another telephone other electrical equipment ake or 2 Plug the main power lead and the telephone .
AC/DC adaptor installation Connect the plug of the adaptor to the power jack of the base set located at the back, and connect it to the 220V sock et. Phone line connection Connect the plug of the telephone line cord to the jack of base set located at the back, and connect it the line socket.
Handset On/Off Press key to switch handset On or put it in the cradle for charging. It will switch On automatically . T o switch Off , hold and press key for approximately 2 seconds.
P utting the caller on hold During a phone conversation, press the INT k ey . The other party will hear beeping sound. Press INT k ey again to restore the phone conversation. Microphone mute During a phone conversation, press key , the LCD screen will display .
Caller Identity ( work able only if subscribed with network operator ) SD8141 is able to display the caller number . If the caller number is stored into the phone book, the name will be displayed. It stores the last 20 calls automatically (the symbol on LCD screen and the light on the base will blink when the call is not answered).
Warning and confirmation tone On/Off There will be a warning beep when the phone is Out of range, L ow Batter y , Confirmation at Programming and K ey Click. These tones can be disabled by: - enter sub- menu " HANDSET " which is in the main menu, search for "T ONES" .
Base ringer tone setting Set up to 5 different ringer tones. T o set, follow as below: - enter sub-menu " BASE " which is in the main menu, search for " RINGER " . Press and select " MELOD Y " . Press and the desired tone by or keys.
Phone book SD8141 can store up to 40 alphanumeric memories with name of 8 ch aracters and numbers of 18 digits. T o store, follow as below: - enter sub-menu " PHONEBOOK " which is in the main menu and select " NEW " . Input name by the alphanumeric keypad (see table below) and press .
Alarm setting SD8141 is equipped with daily alarm. The alarm can be set daily but the alarm time will reflect the time that was set previously . The alarm duration is 30 seconds. Press any handset key to stop alarm. T o set, follow as below: - enter sub-menu " HANDSET " which is in the main menu and search for " AL ARM " .
P ABX code T o obtain an external line, the norm is to dial a ‘0’ or ‘9’ for dial tone if the unit is connected to a P ABX. If you were to program a PABX code, there will be a pause of 3/5 seconds between the line access code (0 or 9) and the number to be dialled out.
LCR (L east Cost Routing) SD8141 is equipped with LCR multi carrier system. T o understand the operational method of LCR, there is a need to deepen the routing.
Setting LCR “Special” Enter sub-menu "LCR " which is in the main menu and search for " SPECIAL " . Press and look for " NEW " . Press , enter area code up to maximum 6 digit and press to confirm. T o modify an area code : under sub-menu " SPECIAL " , select " MODIFY ".
De-subscribe an handset Enter sub- menu " BASE " which is in the main menu and search for " ADV ANCED " . Press , "PIN " will be displayed. Enter PIN code (0000 default) and press . Look for " DEL HS " and press .
Subscribe handset to another base The procedure is the same as those described in "Subscription of optional handset". If the base where you want to subscribe the SD8141 handset is of a different model, please follow the instruction manual on how to put it in subscription mode.
An important point after buying a device Shiro SD8141 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shiro SD8141 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shiro SD8141 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shiro SD8141 you will learn all the available features of the product, as well as information on its operation. The information that you get Shiro SD8141 will certainly help you make a decision on the purchase.
If you already are a holder of Shiro SD8141, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shiro SD8141.
However, one of the most important roles played by the user manual is to help in solving problems with Shiro SD8141. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shiro SD8141 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
