Instruction/ maintenance manual of the product 80702 Shindaiwa
Go to page of 6
SHINDAIW A OWNER’S/OPERA TOR’S MANUAL SP518 BACK P ACK SPRA YER 䊛 Part Number 80702 Rev. 4/02 WARNING! Minimize the risk of injury to yourself and others! Read this manual and familiarize yourself with the contents. Always wear eye protection, gloves and a respirator when operating this unit.
2 This manual contains information for the proper assembly, operation and care of your SP518 sprayer. Carefully read and follow the instructions contained in this manual before operat- ing your sprayer.
3 Connecting Rod Lever Washer Hitch Pin Install the Pump Lever and Connecting Rod Washer Washer Hitch Pin Pump Lever Shaft 1. Lightly grease the end of the pump lever connecting rod and insert into the upper hole in the pump lever. Secure with flat washer and hitch pin.
4 1. Remove (2) hitch pins, washers and the pump lever from the base of the sprayer. 2. Remove the pump lever shaft and detach both shoulder straps at the base. 3. Install the pump lever shaft into the opposite hole in the sprayer base and insert the shaft retaining pin.
5 3. Attach the flow calibrator bottle to the wand: a. Remove the nozzle, cap and filter from the spray wand. b. Mount the flow calibrator cover to the spray wand. c. Reinstall the nozzle, filter and nozzle cap. d. Screw the flow calibrator bottle into the cover.
6 725267 All brass spray wand assembly (21.6 " ) for extra duty applications. Trigger valve and spray tube are brass. 40 mesh stainless steel nozzle and trigger valve filters included. Fitted with JD-12P cone nozzle. 761882 Spray hood is used for nonselec- tive herbicides when spraying under windy conditions.
An important point after buying a device Shindaiwa 80702 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shindaiwa 80702 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shindaiwa 80702 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shindaiwa 80702 you will learn all the available features of the product, as well as information on its operation. The information that you get Shindaiwa 80702 will certainly help you make a decision on the purchase.
If you already are a holder of Shindaiwa 80702, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shindaiwa 80702.
However, one of the most important roles played by the user manual is to help in solving problems with Shindaiwa 80702. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shindaiwa 80702 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
