Instruction/ maintenance manual of the product PM-9901 Sherwood
Go to page of 9
.
PM-9901 DIRECT DRIVE TURN T A B L E O P E R A T I N G I N S T R U C T I O N S TURN T A B L E.
P R E C A U T I O N S 1 Thank you for purchasing this fine product – STEREO TURNTABLE. Taking time to read these operation instructions carefully. Read this manual carefully before using the unit and be sure to store the manual in a safe place for future reference.
NAME OF PARTS 2 1). 45-rpm Adaptor 2). Slip Mat 3). Center Spindle 4). Strobe Dots 5). Power Switch / Strobe 6). Start/Stop Button 7). Beat Out : Frequency output of beat out is 675Hz while pitch is in middle position 0% 8). Taget Light 9). Remote Control : This jack can be connected with an external switch to perform the Start/Stop operation.
3 BEFORE USE C O N N E C T I O N S S P E C I F I C A T I O N S P L A C E M E N T M A I N T E N A N C E ※ Check following parts included in the package with the main unit: 1) Turntable platter 2) Sli.
C O N T E N T S 6 4 A S S E M B L Y 1. Remove the main unit with the packing from the box and take off the packing. 2. Set the 45-rpm adaptor on the main unit. 3. Insert the turntable platter onto the center spindle. 4. Set the slip mat on the platter.
CHANGING THE SPEED 7 O P E R A T I O N STYLUS REPLACEMENT 5 1. Push the power button to turn on the power, the speed indicator and the strobe-illuminator will light up. 2. Place a record on the slip mat, when playing a 45rpm record with a large center hole, place the 45-rpm adaptor on the center spindle.
C O N T E N T S 8 6 GENERAL SPECIFICATION 1. APPLICATION : This spectftcation applies to the Direct drive turntable unit PM-9901 2. TURNTABLE SECTION: Type 2-speed full manual Motor 8 pole, 2phase, brushless DC motor Driving Method Direct Drive Turntable plater 330mm dia.
C O N T E N T S 9 TROUBLE SHOOTING 7 Sometimes, an operational fault can be mistaken for a malfunction or failure. Check the following points and see if you can find the symptoms of the trouble below before you get in touch with the serviceman. If you cannot locate the symptoms, contact your nearest dealer.
An important point after buying a device Sherwood PM-9901 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood PM-9901 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood PM-9901 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood PM-9901 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood PM-9901 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood PM-9901, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood PM-9901.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood PM-9901. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood PM-9901 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center